NSN 5905-01-336-6297 · NIIN 013366297 · FSC 5905
NO DASHES 5905013366297
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Application: TERMINAL BOAR
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPM | BODY DIAMETER | INCHES NOMINAL 3.000 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.2494 AND INCHES MAXIMUM 0.2497 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.310 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.862 AND INCHES MAXIMUM 1.162 |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | INCHES NOMINAL 2.250 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 358.0 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGAV | END ITEM IDENTIFICATION | TERMINAL BOAR |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.164 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| AXGY | MOUNTING METHOD | THREADED HOLE(S) |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 5.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 278.3 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 3.5 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZY |
| FEAT | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO4384 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 3 |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | REFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP. |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 118140-1 | 4N727 |
| 118140-1 | 62793 |
| 5719-1112-0 | 73138 |
| 400-906 | 02111 |
| LO4384 | 16236 |