NSN 5905-01-351-3649 · NIIN 013513649 · FSC 5905
NO DASHES 5905013513649
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.3740 AND INCHES MAXIMUM 0.3750 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| ABNB | FIRST FLAT LENGTH | INCHES NOMINAL 0.210 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.400 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0630 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 0.515 |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 120.0 |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.093 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.688 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.188 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MAXIMUM 0.5150 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0620 |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | INCHES MINIMUM 0.374 AND INCHES MAXIMUM 0.375 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 3240.0 AND MAXIMUM 3260.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.50 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.30 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 20.00 |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.1 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT SLEEVE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 10.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 3240.0 AND MAXIMUM 3260.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.15 TO 0.15 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -200.0 TO 200.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -55.0 TO 125.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 20.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 3 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 40-541-5923-10 | 35012 |
| 164-5010-10K | K1021 |
| 164-5010 | 02111 |
| 40-541-5923-10 | 058R3 |