NSN 5905-01-684-4010 · NIIN 016844010 · FSC 5905
NO DASHES 5905016844010
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES NOMINAL 1.00 |
| AAPN | SECTION QUANTITY | 1 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.093 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.115 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.190 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.315 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.058 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | RESISTORS, VARIABLE, NONWIRE WOUND, TRIMMER, 3/4 WATTS, FLEXIBLE LEADS |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.75 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 6.00 |
| CQTM | TERMINAL LOCATION | REAR END |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.250 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 10.0 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3059L-1-100 | 32997 |
| 3059-FY7-100 | 32997 |
| 3059L-1-100 | 80294 |
| MIL-R-22097/2 | 81349 |
| MIL-PRF-22097/2 | 81349 |
| MIL-R-39035/1 | 81349 |
| RJ12FL100 | 81349 |
| RJR12FL100M | 81349 |
| 97012-100 | 037Z3 |
| 97012 | 037Z3 |
Supersedes
This item replaces cancelled NIIN 012925851. An older drawing citing one of those numbers resolves here.