NSN 5910-00-010-8325 · NIIN 000108325 · FSC 5910
NO DASHES 5910000108325
In Stock
CAPACITOR,FIXED,ELECTROLYTIC
Capacitors
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAQL | BODY STYLE | |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 150.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-39018 TO 1 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-39018 |
| TTQY | TERMINAL TYPE AND QUANTITY | UNINSULATED WIRE LEAD 2 |
| CWSZ | CASE INSULATION MATERIAL | PLASTIC |
| CQBQ | CAPACITANCE VALUE PER SECTION | MICROFARADS SINGLE SECTION 33.000 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 85.0 |
| CQLH | DC LEAKAGE AT MAXIMUM OPERATING TEMP | MICROAMPERES 42.0 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -10.00 TO 30.00 |
| CWNJ | CAPACITIVE ELECTRODE MATERIAL | ALUMINUM |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 10.0000 |
| CWQC | EQUIVALENT SERIES RESISTANCE AT REFERENCE TEMP IN OHMS | 4.02 |
| CWQH | DC LEAKAGE AT REFERENCE TEMP | MICROAMPERES 7.000 |
| AEBT | TERMINAL DIAMETER | INCHES NOMINAL 0.032 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AECE | ANODE TYPE | PLAIN FOIL |
| AECN | IMPEDANCE AT MINIMUM OPERATING TEMP IN OHMS | 91.0 |
| AECQ | ELECTRICAL POLARIZATION | POLARIZED |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.383 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 2.391 |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 1.500 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 8813200001-7 | 57057 |
| CU13CQ330T | 81349 |
| M39018-01-0759 | 81349 |
| M39018+01+0759 | 81349 |
| M39018/01-0659 | 81349 |
| MILC39018-1 | 81349 |
| CU13CQ330J | 81349 |