NSN 5910-00-126-1619 · NIIN 001261619 · FSC 5910
NO DASHES 5910001261619
In Stock
CAPACITOR,VARIABLE,CERAMIC DIELE
Capacitors
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.220 AND INCHES MAXIMUM 0.310 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.840 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.640 |
| ADAU | BODY HEIGHT | INCHES MAXIMUM 0.406 |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.120 |
| AECK | DISSIPATION FACTOR AT 25 DEG CELSIUS IN PERCENT | 0.2 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES NOMINAL 0.438 |
| AKNA | INCLOSURE TYPE | ENCAPSULATED |
| AXGR | ADJUSTMENT DEVICE TORQUE | INCH-OUNCES MINIMUM 4.000 AND INCH-OUNCES MAXIMUM 24.000 |
| AXGT | INSULATION DC RESISTANCE AT 25 DEG CELSIUS | MEGOHMS 10000.0 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 2 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 85.0 |
| CTGN | CAPACITANCE RANGE IN PICOFARADS | 4.5 TO 25.0 |
| CTGP | NONDERATED VOLTAGE RATING AND TYPE | SINGLE SECTION DC CONTINUOUS 500.0 |
| CTGQ | CAPACITANCE CHANGE IN PERCENT AT OPERATING TEMP FROM 25 DEG CELSIUS | SINGLE SECTION MINIMUM -4.50 TO 2.00 AND MAXIMUM -2.50 TO 2.00 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-81 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 2 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-81 TO 1 |
| CTGS | CAPACITANCE DRIFT IN PICOFARADS | 0.50 |
| CTGR | ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY | SLOTTED SCREW 1 |
Cross-references
18 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 44B402 | 26916 |
| 235-01014P006 | 49956 |
| CU11A250 | 50237 |
| 1079900420 | 57057 |
| 825AZ | 71590 |
| 503-001-37A | 72982 |
| 503-01NP04-5-25 | 72982 |
| 503-041A4-5-25 | 72982 |
| 503-000C0P037R | 72982 |
| 281-010 | 80009 |
| 281-0010-00 | 80009 |
| 3330-313420145 | 80049 |
| 3330-058220024 | 80049 |
| MIL-C-81/1 | 81349 |
| MIL-PRF-81/1 | 81349 |
| CV11C250 | 81349 |
| CV11A250 | 81349 |
| CV1008 | 92755 |
Supersedes
This item replaces cancelled NIINs 000198197 · 007725997 · 008066893 · 008433720. An older drawing citing one of those numbers resolves here.