CAPACITOR,FIXED,PLASTIC DIELECTR

Name: CAPACITOR,FIXED,PLASTIC DIELECTR
Brand: Atlas Air Supply
SKU: 5910004340825
Availability: LimitedAvailability

Capacitors

Technical characteristics

22 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
CRHD	TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS	SINGLE SECTION -50.0 TO 50.0
CRTL	CRITICALITY CODE JUSTIFICATION	FEAT
CQLZ	TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS	SINGLE SECTION 0.0
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
ABJT	TERMINAL LENGTH	INCHES NOMINAL 1.250
ADAQ	BODY LENGTH	INCHES NOMINAL 0.600
CWSG	TERMINAL SURFACE TREATMENT	SOLDER
FEAT	SPECIAL FEATURES	WEAPON SYSTEM ESSENTIAL
ADAU	BODY HEIGHT	INCHES NOMINAL 0.295
AEBP	CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.505
ADAT	BODY WIDTH	INCHES NOMINAL 0.375
CQBQ	CAPACITANCE VALUE PER SECTION	MICROFARADS SINGLE SECTION 0.100
CQJJ	NONDERATED OPERATING TEMP	CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 85.0
CQWM	NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	DC SINGLE SECTION 50.0
AAQL	BODY STYLE
TTQY	TERMINAL TYPE AND QUANTITY	UNINSULATED WIRE LEAD 2
CRTP	TOLERANCE RANGE PER SECTION	PERCENT SINGLE SECTION -1.00 TO 1.00
CWPK	INSULATION RESISTANCE AT REFERENCE TEMP	MEGOHMS 100000.0
CWPM	DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT	0.3000
MATT	MATERIAL	CASE PLASTIC
TEST	TEST DATA DOCUMENT	DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 03640-6096381
AEBZ	SCHEMATIC DIAGRAM DESIGNATOR

4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.