NSN 5910-00-455-4476 · NIIN 004554476 · FSC 5910
NO DASHES 5910004554476
In Stock
CAPACITOR,FIXED,CERAMIC DIELECTR
Capacitors
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.090 |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | INCHES NOMINAL 0.200 |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.1000 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 1.250 |
| CQBF | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | MEGOHMS 10000.0 |
| CQBQ | CAPACITANCE VALUE PER SECTION | PICOFARADS SINGLE SECTION 4700.000 |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 2.5000 |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | MEGOHMS 100000.0 |
| AAQL | BODY STYLE | |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 125.0 |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 200.0 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.290 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.290 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-39014 |
| TTQY | TERMINAL TYPE AND QUANTITY | UNINSULATED WIRE LEAD 2 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-39014 TO 2 |
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -10.00 TO 10.00 |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| MATT | MATERIAL | CASE PLASTIC |
| CQFB | VOLTAGE TEMP LIMITS PER SECTION IN PERCENT CAPACITANCE CHANGE | WITH RATED VOLTAGE APPLIED SINGLE SECTION -25.0 TO 15.0 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| AEBT | TERMINAL DIAMETER | INCHES NOMINAL 0.025 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MILC39014-2 | 81349 |
| M39014-02-0252 | 81349 |
| CKR06BX472KP | 81349 |