NSN 5910-00-725-4150 · NIIN 007254150 · FSC 5910
NO DASHES 5910007254150
In Stock
CAPACITOR,VARIABLE,AIR DIELECTRI
Capacitors
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-92 |
| CTGR | ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY | SHAFT 1 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 2 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 85.0 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.250 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 1.000 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.500 |
| AECJ | QUALITY FACTOR AT 25 DEG CELSIUS | 1500.0 |
| CTGN | CAPACITANCE RANGE IN PICOFARADS | 6.0 TO 75.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 1 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 1.219 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.938 |
| CTGP | NONDERATED VOLTAGE RATING AND TYPE | SINGLE SECTION DC CONTINUOUS 500.0 |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.500 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.112 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| AXGR | ADJUSTMENT DEVICE TORQUE | INCH-OUNCES MINIMUM 2.500 AND INCH-OUNCES MAXIMUM 10.000 |
| AXCN | SPLIT-STATOR ROTARY PLATE TYPE | DIFFERENTIAL |
| AXGJ | ADJUSTMENT DEVICE ROTATION | DEGREES NOMINAL CLOCKWISE 180.0 |
| AXCM | TUNING CHARACTERISTIC | SINGLE SECTION STRAIGHT LINE CAPACITY |
| AKNA | INCLOSURE TYPE | UNINCLOSED |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES NOMINAL 0.656 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CT14E075M | 81349 |
| MIL-C-92/5 | 81349 |
| CT1E075 | 81349 |
| CT14E075J | 81349 |
| MILC92 | 81349 |
Supersedes
This item replaces cancelled NIINs 000585288 · 001268334 · 006439297. An older drawing citing one of those numbers resolves here.