NSN 5910-00-725-7011 · NIIN 007257011 · FSC 5910
NO DASHES 5910007257011
In Stock
CAPACITOR,FIXED,CERAMIC DIELECTR
Capacitors
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| TTQY | TERMINAL TYPE AND QUANTITY | UNINSULATED WIRE LEAD 2 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 1.250 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| MATT | MATERIAL | CASE CERAMIC |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-20 |
| CRTP | TOLERANCE RANGE PER SECTION | PICOFARADS SINGLE SECTION -0.25 TO 0.25 |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | MEGOHMS 50000.0 |
| CWQF | QUALITY FACTOR AT REFERENCE TEMP | 3.6000 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 500.00 |
| CRHD | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -60.0 TO 60.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-20 TO 1B |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 85.0 |
| CQLZ | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION 0.0 |
| CQBQ | CAPACITANCE VALUE PER SECTION | PICOFARADS SINGLE SECTION 6.000 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| CQBF | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | MEGOHMS 1000.0 |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | INCHES NOMINAL 0.250 |
| AEBT | TERMINAL DIAMETER | INCHES NOMINAL 0.025 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.180 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.375 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 301-651C0H0-609C | 72982 |
| CC20CH060C | 81349 |
| MILC20-1 | 81349 |
| 118141 | 06481 |
| 916-0121-000 | 13499 |
| 916-0121-00 | 13499 |
Supersedes
This item replaces cancelled NIIN 001971483. An older drawing citing one of those numbers resolves here.