NSN 5910-00-807-1538 · NIIN 008071538 · FSC 5910
NO DASHES 5910008071538
In Stock
CAPACITOR,FIXED,CERAMIC DIELECTR
Capacitors
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 500.0 |
| CWQF | QUALITY FACTOR AT REFERENCE TEMP | 1000.0000 |
| AEBT | TERMINAL DIAMETER | INCHES NOMINAL 0.025 |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | INCHES NOMINAL 0.250 |
| CQBF | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | MEGOHMS 1000.0 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 1.250 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.225 |
| CQBQ | CAPACITANCE VALUE PER SECTION | PICOFARADS SINGLE SECTION 9.000 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.430 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-20 |
| TTQY | TERMINAL TYPE AND QUANTITY | UNINSULATED WIRE LEAD 2 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 125.0 |
| CQLZ | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION 0.0 |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | MEGOHMS 50000.0 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| MATT | MATERIAL | CASE PLASTIC |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-20 TO 3B |
| CRHD | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -60.0 TO 60.0 |
| CRTP | TOLERANCE RANGE PER SECTION | PICOFARADS SINGLE SECTION -0.50 TO 0.50 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-C-20/3 | 81349 |
| CC22CH090D | 81349 |
| 928-0134-000 | 13499 |