NSN 5910-00-811-8336 · NIIN 008118336 · FSC 5910
NO DASHES 5910008118336
In Stock
CAPACITOR,FIXED,CERAMIC DIELECTR
Capacitors
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | CASE CERAMIC |
| AEBS | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER | INCHES MINIMUM 0.190 AND INCHES MAXIMUM 0.310 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-20 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| CWQF | QUALITY FACTOR AT REFERENCE TEMP | 630.0000 |
| CQBF | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | MEGOHMS 1000.0 |
| CQBQ | CAPACITANCE VALUE PER SECTION | PICOFARADS SINGLE SECTION 12.000 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 125.0 |
| CQLZ | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -750.0 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CRHD | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -120.0 TO 120.0 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.280 |
| TTQY | TERMINAL TYPE AND QUANTITY | UNINSULATED WIRE LEAD 2 |
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -2.00 TO 2.00 |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | MEGOHMS 50000.0 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 1.250 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.120 |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 500.0 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 831-020U2J0-120G | 72982 |
| MIL-C-20/16 | 81349 |
| CC50UJ120G | 81349 |
| CC50UJ120J | 81349 |
| MILC20 | 81349 |
| 0831020U2J0 120G | 18796 |