NSN 5910-00-830-4899 · NIIN 008304899 · FSC 5910
NO DASHES 5910008304899
In Stock
CAPACITOR,VARIABLE,GLASS DIELECT
Capacitors
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AXGT | INSULATION DC RESISTANCE AT 25 DEG CELSIUS | GIGOHMS 100.0 |
| AXGR | ADJUSTMENT DEVICE TORQUE | INCH-OUNCES MINIMUM 1.000 AND INCH-OUNCES MAXIMUM 10.000 |
| AXGS | BUSHING SHAPE | ROUND W/FLAT |
| AKNA | INCLOSURE TYPE | ENCASED |
| ABXD | BUSHING LENGTH | INCHES NOMINAL 0.281 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.125 |
| CTGP | NONDERATED VOLTAGE RATING AND TYPE | SINGLE SECTION DC CONTINUOUS 1250.0 |
| CTGR | ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY | SHAFT 1 |
| CTGS | CAPACITANCE DRIFT IN PICOFARADS | 0.04 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-14409 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 1 |
| AAQL | BODY STYLE | |
| ABKH | BUSHING DIAMETER | INCHES NOMINAL 0.190 |
| AXHG | BUSHING WIDTH | INCHES NOMINAL 0.167 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED BUSHING 1 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 125.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.062 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 0.312 |
| AEBF | TEMP COEFFICIENT OF CAPACITANCE RANGE IN PPM PER DEG CELSIUS | -100.0 TO 100.0 |
| AECJ | QUALITY FACTOR AT 25 DEG CELSIUS | 700.0 |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNF |
| CTGN | CAPACITANCE RANGE IN PICOFARADS | 0.8 TO 23.0 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| PC38H180 | 81349 |
| MIL-PRF-14409/4 | 81349 |
| MIL-C-14409/4 | 81349 |
| PC48H230 | 81349 |
| 4450-0030-009 | 06032 |
| TM23G | 18736 |
Supersedes
This item replaces cancelled NIIN 009038432. An older drawing citing one of those numbers resolves here.