NSN 5910-00-835-2942 · NIIN 008352942 · FSC 5910
NO DASHES 5910008352942
In Stock
CAPACITOR,FIXED,PLASTIC DIELECTR
Capacitors
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEBT | TERMINAL DIAMETER | INCHES NOMINAL 0.025 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-27287 |
| TTQY | TERMINAL TYPE AND QUANTITY | UNINSULATED WIRE LEAD 2 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 1.625 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 125.0 |
| CQLZ | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION 0.0 |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 100.0 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| CQBF | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | MEGOHM-MICROFARADS 20.0 |
| CQBQ | CAPACITANCE VALUE PER SECTION | PICOFARADS SINGLE SECTION 33000.000 |
| CRHD | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -10.0 TO 20.0 |
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -10.00 TO 10.00 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-27287 TO 1 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.812 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.250 |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | MEGOHM-MICROFARADS 25000.0 |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.0000 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| MATT | MATERIAL | CASE PLASTIC |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-C-27287 | 81349 |
| CTM333VBK | 81349 |