NSN 5910-00-901-9311 · NIIN 009019311 · FSC 5910
NO DASHES 5910009019311
In Stock
CAPACITOR,VARIABLE,AIR DIELECTRI
Capacitors
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.187 |
| CTGN | CAPACITANCE RANGE IN PICOFARADS | 0.9 TO 71.0 |
| CTGR | ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY | SHAFT 4 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 7.030 |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 2 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.164 |
| CTGN | CAPACITANCE RANGE IN PICOFARADS | 0.7 TO 46.2 |
| AKNA | INCLOSURE TYPE | UNINCLOSED |
| AXCM | TUNING CHARACTERISTIC | ALL SECTIONS STRAIGHT LINE CAPACITY |
| AXGJ | ADJUSTMENT DEVICE ROTATION | DEGREES NOMINAL CLOCKWISE 180.0 |
| CTGN | CAPACITANCE RANGE IN PICOFARADS | 0.8 TO 56.8 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.718 |
| AFBH | INDIVIDUAL SECTION QUANTITY | 4 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 00724-11-00186-00 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| S80064 | 31966 |
| 800604 | 58022 |
| 11-00186-00 | 00724 |
| 11-00186-000 | 00724 |