NSN 5910-00-934-1693 · NIIN 009341693 · FSC 5910
NO DASHES 5910009341693
In Stock
CAPACITOR,FIXED,ELECTROLYTIC
Capacitors
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -10.00 TO 50.00 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.875 |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 12.0000 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AECQ | ELECTRICAL POLARIZATION | POLARIZED |
| CWNJ | CAPACITIVE ELECTRODE MATERIAL | ALUMINUM |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.437 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 2.312 |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 200.0 |
| CWQH | DC LEAKAGE AT REFERENCE TEMP | MICROAMPERES 110.000 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CQBQ | CAPACITANCE VALUE PER SECTION | MICROFARADS SINGLE SECTION 25.000 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -40.0 AND CELSIUS MAXIMUM 85.0 |
| CWSZ | CASE INSULATION MATERIAL | PLASTIC |
| AECE | ANODE TYPE | PLAIN FOIL |
| AECN | IMPEDANCE AT MINIMUM OPERATING TEMP IN OHMS | 180.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-62 TO 6 |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UN |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED BUSHING 1 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 2 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-62 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.375 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CE44C250K | 81349 |
| MIL-PRF-62/6 | 81349 |
| M62-06-061 | 81349 |
| MIL-C-62/6 | 81349 |