NSN 5910-00-935-3420 · NIIN 009353420 · FSC 5910
NO DASHES 5910009353420
In Stock
CAPACITOR,VARIABLE,AIR DIELECTRI
Capacitors
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AXCM | TUNING CHARACTERISTIC | SINGLE SECTION STRAIGHT LINE CAPACITY |
| AECJ | QUALITY FACTOR AT 25 DEG CELSIUS | 1500.0 |
| AXGJ | ADJUSTMENT DEVICE ROTATION | DEGREES NOMINAL CLOCKWISE 180.0 |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.157 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 85.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.112 |
| AXCN | SPLIT-STATOR ROTARY PLATE TYPE | DIFFERENTIAL |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CTGN | CAPACITANCE RANGE IN PICOFARADS | 9.0 TO 135.0 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 1.219 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.938 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.297 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.219 |
| AXGR | ADJUSTMENT DEVICE TORQUE | INCH-OUNCES MINIMUM 2.500 AND INCH-OUNCES MAXIMUM 10.000 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES NOMINAL 0.656 |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AKNA | INCLOSURE TYPE | UNINCLOSED |
| CTGP | NONDERATED VOLTAGE RATING AND TYPE | SINGLE SECTION DC CONTINUOUS 500.0 |
| CTGR | ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY | SHAFT 1 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-92 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 1 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.938 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 2 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ESA682070ISS24PT19 | 3B4M0 |
| ESA682070ISSUE24 | 71313 |
| ESA682070ISSUE24 | 70408 |
| MIL-C-92/3 | 81349 |
| CT12E135M | 81349 |
| MILC92 | 81349 |
| CT12E135J | 81349 |
Supersedes
This item replaces cancelled NIINs 001875737 · 008100449. An older drawing citing one of those numbers resolves here.