NSN 5910-00-939-4159 · NIIN 009394159 · FSC 5910
NO DASHES 5910009394159
In Stock
CAPACITOR,FIXED,MICA DIELECTRIC
Capacitors
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQBQ | CAPACITANCE VALUE PER SECTION | PICOFARADS SINGLE SECTION 22000.000 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 1.780 |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.0000 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-5 |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | MEGOHMS 7500.0 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 70.0 |
| AAQL | BODY STYLE | |
| CRDN | TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION 0.0 TO 70.0 |
| CQBF | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | MEGOHM-MICROFARADS 10.0 |
| MATT | MATERIAL | CASE PLASTIC |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | AC-PEAK SINGLE SECTION 2000.0 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| TTQY | TERMINAL TYPE AND QUANTITY | THREADED STUD 2 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 2.280 |
| ADAT | BODY WIDTH | INCHES NOMINAL 1.270 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED MOUNTING HOLES 2 |
| AEBK | MAXIMUM RF CURRENT RATING AT HIGHEST RATED FREQUENCY IN RMS AMPS | 13.0 |
| AEBL | HIGHEST FREQUENCY AT WHICH RF CURRENT RATING APPLIES IN KILOHERTZ | 3000.0 |
| AEBM | MAXIMUM RF CURRENT RATING AT LOWEST RATED FREQUENCY IN RMS AMPS | 6.2 |
| AEBN | LOWEST FREQUENCY AT WHICH RF CURRENT RATING APPLIES IN KILOHERTZ | 100.0 |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.200 |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | INCHES NOMINAL 2.625 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -2.00 TO 2.00 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CM70BJ223GM1 | 81349 |
| CM70FJ223GM1 | 81349 |
| MIL-C-5/12 | 81349 |
| 938-2129-000 | 13499 |
Supersedes
This item replaces cancelled NIINs 006488631 · 006440835 · 007755646. An older drawing citing one of those numbers resolves here.