ATLASAir Supply

321-252-9430Mon–Fri · 8a–6p ET
Quote0 Request a Quote →
Home / MS parts / Electrical & Electronic Components / NSN 5910-00-942-5618
NSN 5910-00-942-5618  ·  NIIN 009425618  ·  FSC 5910
NO DASHES 5910009425618
In Stock

CAPACITOR,FIXED,GLASS DIELECTRIC

Capacitors

Technical characteristics

23 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

MRCRequirementValue
ADAUBODY HEIGHTINCHES MINIMUM 0.110 AND INCHES MAXIMUM 0.120
AEBTTERMINAL DIAMETERINCHES NOMINAL 0.020
ADATBODY WIDTHINCHES MINIMUM 0.190 AND INCHES MAXIMUM 0.210
CQJJNONDERATED OPERATING TEMPCELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 125.0
CQLZTEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUSSINGLE SECTION 140.0
CWSGTERMINAL SURFACE TREATMENTGOLD
CQBFINSULATION RESISTANCE AT MAXIMUM OPERATING TEMPMEGOHMS 10000.0
CQWMNONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTIONDC SINGLE SECTION 300.0
CWPKINSULATION RESISTANCE AT REFERENCE TEMPMEGOHMS 100000.0
AEBZSCHEMATIC DIAGRAM DESIGNATOR
CQBQCAPACITANCE VALUE PER SECTIONPICOFARADS SINGLE SECTION 560.000
AAQLBODY STYLE
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABJTTERMINAL LENGTHINCHES MINIMUM 1.250
ADAQBODY LENGTHINCHES MINIMUM 0.295 AND INCHES MAXIMUM 0.305
CWQFQUALITY FACTOR AT REFERENCE TEMP1000.000
CWPMDISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT0.001
MATTMATERIALCASE PLASTIC
AEBPCENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTHINCHES MINIMUM 0.180 AND INCHES MAXIMUM 0.220
TTQYTERMINAL TYPE AND QUANTITYUNINSULATED WIRE LEAD 2
CRTPTOLERANCE RANGE PER SECTIONPERCENT SINGLE SECTION -1.00 TO 1.00
PMLCPRECIOUS MATERIAL AND LOCATIONGOLD TER-INAL SURFACES
CRHDTOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUSSINGLE SECTION -25.0 TO 25.0

Cross-references

2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.

Manufacturer part numberCAGE
40-904006-561104655
CY06C561F16299