NSN 5910-00-943-9264 · NIIN 009439264 · FSC 5910
NO DASHES 5910009439264
In Stock
CAPACITOR,FIXED,MICA DIELECTRIC
Capacitors
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED MOUNTING HOLES 1 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.420 |
| MATT | MATERIAL | CASE PLASTIC |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C- TO 5 |
| CQBF | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | MEGOHMS 1500.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | INCHES NOMINAL 1.750 |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.144 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.940 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.250 |
| ADAT | BODY WIDTH | INCHES NOMINAL 1.120 |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 1200.0 |
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -2.00 TO 2.00 |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | MEGOHMS 10000.0 |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.001 |
| CQBQ | CAPACITANCE VALUE PER SECTION | PICOFARADS SINGLE SECTION 11000.000 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 125.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-5 TO 8 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 2 |
| AAQL | BODY STYLE | |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | INCHES NOMINAL 1.312 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CM50BG113G03 | 81349 |
| MIL-C-5/8 | 81349 |
Supersedes
This item replaces cancelled NIIN 001925333. An older drawing citing one of those numbers resolves here.