NSN 5910-01-055-3644 · NIIN 010553644 · FSC 5910
NO DASHES 5910010553644
In Stock
CAPACITOR,FIXED,CERAMIC DIELECTR
Capacitors
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 1.500 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.500 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.500 |
| ADAU | BODY HEIGHT | INCHES MAXIMUM 0.300 |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | INCHES NOMINAL 0.400 |
| AEBT | TERMINAL DIAMETER | INCHES NOMINAL 0.025 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| CQBQ | CAPACITANCE VALUE PER SECTION | MICROFARADS SINGLE SECTION 0.220 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 85.0 |
| CQLZ | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION 0.0 |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 500.0 |
| CRHD | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -15.0 TO 15.0 |
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -10.00 TO 10.00 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| MATT | MATERIAL | CASE CERAMIC |
| TTQY | TERMINAL TYPE AND QUANTITY | UNINSULATED WIRE LEAD 2 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 8161-N025-651-224 | 72982 |
| 8151-500X7R0224K | 72982 |
| 8151M500X7R0224K | 72982 |
| 8161-N025-651-224M | 72982 |
| 030-310 | 09150 |
| 8161-N025-651-224 | 18796 |
| 8161-N025-651-224M | 18796 |
| 8151-500X7R0224K | 18796 |
| 8151-A500-X7R0-224K | 18796 |
Supersedes
This item replaces cancelled NIINs 010810138 · 012523953. An older drawing citing one of those numbers resolves here.