NSN 5910-01-089-5108 · NIIN 010895108 · FSC 5910
NO DASHES 5910010895108
In Stock
CAPACITOR,FIXED,MICA DIELECTRIC
Capacitors
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ADAQ | BODY LENGTH | INCHES NOMINAL 3.000 |
| ADAT | BODY WIDTH | INCHES NOMINAL 2.375 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 2.875 |
| AEBK | MAXIMUM RF CURRENT RATING AT HIGHEST RATED FREQUENCY IN RMS AMPS | 18.0 |
| AEBL | HIGHEST FREQUENCY AT WHICH RF CURRENT RATING APPLIES IN KILOHERTZ | 3000.0 |
| AEBM | MAXIMUM RF CURRENT RATING AT LOWEST RATED FREQUENCY IN RMS AMPS | 15.0 |
| AEBN | LOWEST FREQUENCY AT WHICH RF CURRENT RATING APPLIES IN KILOHERTZ | 300.0 |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | INCHES NOMINAL 1.438 |
| AEBU | TERMINAL HEIGHT FROM BODY | INCHES NOMINAL 1.000 |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.266 |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | INCHES NOMINAL 3.562 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES NOMINAL 1.625 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED MOUNTING HOLES 3 |
| CQBQ | CAPACITANCE VALUE PER SECTION | MICROFARADS SINGLE SECTION 0.400 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 85.0 |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 600.0 |
| CRDN | TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION 0.0 TO 70.0 |
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -5.00 TO 5.00 |
| MATT | MATERIAL | CASE PLASTIC |
| TTQY | TERMINAL TYPE AND QUANTITY | STANDOFF, SOLDER STUD 2 |