NSN 5910-01-139-1565 · NIIN 011391565 · FSC 5910
NO DASHES 5910011391565
In Stock
CAPACITOR,FIXED,ELECTROLYTIC
Capacitors
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 1.0000 |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.281 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 3.000 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 5.625 |
| AEBS | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER | INCHES NOMINAL 1.250 |
| AEBT | TERMINAL DIAMETER | INCHES NOMINAL 0.190 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AECN | IMPEDANCE AT MINIMUM OPERATING TEMP IN OHMS | 0.045 |
| AECQ | ELECTRICAL POLARIZATION | POLARIZED |
| CQBQ | CAPACITANCE VALUE PER SECTION | MICROFARADS SINGLE SECTION 110000.000 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 85.0 |
| CQLH | DC LEAKAGE AT MAXIMUM OPERATING TEMP | MILLIAMPERES 11.5 |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 15.0 |
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -10.00 TO 50.00 |
| CWNJ | CAPACITIVE ELECTRODE MATERIAL | ALUMINUM |
| CWQC | EQUIVALENT SERIES RESISTANCE AT REFERENCE TEMP IN OHMS | 0.013 |
| CWQH | DC LEAKAGE AT REFERENCE TEMP | MILLIAMPERES 1.900 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CWSZ | CASE INSULATION MATERIAL | PLASTIC |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-39018 |
| TTQY | TERMINAL TYPE AND QUANTITY | THREADED HOLE 2 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-39018 TO 4 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 36D7879 | 56289 |
| 290-0713-00 | 80009 |
| MIL-PRF-39018/4 | 81349 |
| MIL-C-39018/4 | 81349 |
| M39018/04-2069M | 81349 |
| CGS124U015FJ1 | 90201 |
| CGS124U015X5L3PC | 90201 |
| 254-101010-001 | 97384 |
| CGS124U015X5L3PC | 00853 |
| CGS124U015FJ1 | 00853 |
Supersedes
This item replaces cancelled NIIN 010170106. An older drawing citing one of those numbers resolves here.