NSN 5910-01-718-4613 · NIIN 017184613 · FSC 5910
NO DASHES 5910017184613
In Stock
CAPACITOR,FIXED,METALLIZED,PAPER
Capacitors
Application: C-5
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES MINIMUM 2.09 AND INCHES MAXIMUM 2.11 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 70210-519532 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED MOUNTING HOLES 4 |
| BWGP | SECTION QUANTITY | 1 |
| CWSS | DIELECTRIC MATERIAL | PAPER AND PLASTIC |
| ADAT | BODY WIDTH | INCHES MINIMUM 1.23 AND INCHES MAXIMUM 1.25 |
| AGAV | END ITEM IDENTIFICATION | C-5 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 2 |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | AC-RMS SINGLE SECTION 208.0 |
| CRTP | TOLERANCE RANGE PER SECTION | MILLIFARADS SINGLE SECTION -10.0 TO 10.0 |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | MEGOHMS 2000.0 |
| CWPN | POWER FACTOR AT REFERENCE TEMP IN PERCENT | 1.0 |
| CWQQ | REFERENCE TEMP AT WHICH RATED | CELSIUS 30.0 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.38 AND INCHES MAXIMUM 1.01 |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.158 AND INCHES MAXIMUM 0.167 |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | INCHES MINIMUM 1.870 AND INCHES MAXIMUM 1.880 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES MINIMUM 0.833 AND INCHES MAXIMUM 0.843 |
| CQBQ | CAPACITANCE VALUE PER SECTION | MILLIFARADS SINGLE SECTION 0.7 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | CAPACITOR, FIXED NONREPAIRABLE |
| FEAT | SPECIAL FEATURES | SECOND MOUNTING HOLE DIMENSIONS: 0.168 INCH MIN AND 0.185 INCH MAX; MATERIAL: CAPACITOR SECTION SHALL BE CONSTRUCTED OF ALUMINUM FOIL WITH PAPER AND/OR PLASTIC DIELECTRIC MATERIAL; POWER FACTOR AND INSULATION RESISTANCE TEMP: 20C TO 30C; |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AAQL | BODY STYLE | |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED CASE |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -34.0 AND CELSIUS MAXIMUM 75.0 |