NSN 5915-00-905-8907 · NIIN 009058907 · FSC 5915
NO DASHES 5915009058907
In Stock
FILTER,BAND PASS
Filters and Networks
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.160 |
| AHAV | OUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT | LOCATION NOT OTHERWISE SPECIFIED KILOHMS BLANK 2.0 |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | FIRST FUNCTION PIN INPUT 1 |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | SECOND FUNCTION PIN OUTPUT 1 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 4.500 |
| AHAJ | REFERENCE FREQUENCY PER FUNCTION | LOCATION NOT OTHERWISE SPECIFIED KILOHERTZ BLANK 74.0 |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | INCHES NOMINAL 3.750 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 3.360 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | LOCATION NOT OTHERWISE SPECIFIED UNTHREADED HOLE(S) 4 |
| CQDR | INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | LOCATION NOT OTHERWISE SPECIFIED BLANK 8.0 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 00724-O8-00335-004 |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | THIRD FUNCTION PIN GROUND 2 |
| ADAT | BODY WIDTH | INCHES NOMINAL 1.250 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 3.000 |
| AHAU | INPUT IMPEDANCE PER FUNCTION W/LOAD | LOCATION NOT OTHERWISE SPECIFIED OHMS BLANK 600.0 |
| CRBB | FREQUENCY BAND WIDTH PER FUNCTION | LOCATION NOT OTHERWISE SPECIFIED KILOHERTZ BLANK 72.00 AND KILOHERTZ BLANK 76.00 |
| FEAT | SPECIAL FEATURES | OVERALL WIDTH 1.810 IN. |
| AKNA | INCLOSURE TYPE | HERMETICALLY SEALED |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES NOMINAL 1.562 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 722-4 | 56662 |
| 08-00335-004 | 00724 |
| 606D | 03040 |
| S95893 | 09376 |