NSN 5915-01-355-2439 · NIIN 013552439 · FSC 5915
NO DASHES 5915013552439
In Stock
FILTER,LOW PASS
Filters and Networks
Application: F15E AIRCRAFT
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AFGA | OPERATING TEMP RANGE | CELSIUS 0.0 TO 75.0 |
| AGAV | END ITEM IDENTIFICATION | F15E AIRCRAFT |
| AHAJ | REFERENCE FREQUENCY PER FUNCTION | LOCATION NOT OTHERWISE SPECIFIED GIGAHERTZ BLANK 6.6 |
| AHAQ | SOURCE IMPEDANCE RATING PER FUNCTION | LOCATION NOT OTHERWISE SPECIFIED OHMS BLANK 50.0 |
| AHAS | LOAD IMPEDANCE PER FUNCTION | LOCATION NOT OTHERWISE SPECIFIED OHMS BLANK 50.0 |
| AHBL | PRINCIPAL CIRCUITRY TYPE PER FUNCTION | LOCATION NOT OTHERWISE SPECIFIED INDUCTANCE-CAPACITANCE BLANK |
| AHBN | INPUT TERMINAL MANUFACTURER CODE | 28480 |
| AHBP | INPUT TERMINAL IDENTIFICATION | SMA-PLUG |
| AHBS | OUTPUT TERMINAL MANUFACTURER CODE | 28480 |
| AHBT | OUTPUT TERMINAL IDENTIFICATION | SMA-PLUG |
| AKNA | INCLOSURE TYPE | ENCASED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | LOCATION NOT OTHERWISE SPECIFIED TERMINAL 2 |
| CQDR | INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | LOCATION NOT OTHERWISE SPECIFIED BLANK 0.55 |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | SECOND FUNCTION CONNECTOR, PLUG OUTPUT 1 |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | FIRST FUNCTION CONNECTOR, PLUG INPUT 1 |
| CQFC | SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | LOCATION NOT OTHERWISE SPECIFIED GIGAHERTZ BLANK 3.00 AND GIGAHERTZ BLANK 6.60 AND GIGAHERTZ BLANK 13.20 AND GIGAHERTZ BLANK 26.40 |
| CQRG | BODY MATERIAL | ALUMINUM |
| CRBB | FREQUENCY BAND WIDTH PER FUNCTION | LOCATION NOT OTHERWISE SPECIFIED GIGAHERTZ BLANK 3.00 AND GIGAHERTZ BLANK 6.60 |
| CRBC | DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | LOCATION NOT OTHERWISE SPECIFIED MINIMUM BLANK 1.0 AND MAXIMUM BLANK 10.0 |
| FEAT | SPECIAL FEATURES | TUBULAR WITH 180 DEGREE BEND AT ONE END |