NSN 5920-00-053-8958 · NIIN 000538958 · FSC 5920
NO DASHES 5920000538958
In Stock
FUSEHOLDER,EXTRACTOR POST
Fuses, Arrestors, Absorbers, and Protectors
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 3.750 AND INCHES MAXIMUM 4.000 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 1.812 AND INCHES MAXIMUM 1.817 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 1.180 AND INCHES MAXIMUM 1.185 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.151 AND INCHES MAXIMUM 0.161 |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| ADZC | ENVIRONMENTAL PROTECTION | DRIPPROOF |
| AEVB | MOUNTING HOLE STYLE | |
| AFXH | INTERRUPTION INDICATOR METHOD | INCANDESCENT LAMP |
| AGUE | FUSE ACCOMMODATION QUANTITY | 2 |
| AGUJ | ACCOMMODATED FUSE LENGTH | INCHES NOMINAL 1.250 |
| AGUK | ACCOMMODATED FERRULE DIAMETER | INCHES NOMINAL 0.250 |
| AGUN | RESISTOR RATING | OHMS 330.0 |
| AGUP | INDICATING LAMP VOLTAGE RANGE IN VOLTS | 23.0 TO 33.0 |
| AGUT | LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | INCHES MINIMUM 0.798 AND INCHES MAXIMUM 0.828 |
| AGVB | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 0.933 AND INCHES MAXIMUM 0.943 |
| AGVF | BUSHING HOLE DIAMETER | INCHES MINIMUM 0.869 AND INCHES MAXIMUM 0.879 |
| AGVK | CENTER TO CENTER DISTANCE BETWEEN BUSHING HOLES | INCHES MINIMUM 0.795 AND INCHES MAXIMUM 0.805 |
| AGVM | CENTER TO CENTER DISTANCE BETWEEN KEYWAY AND BUSHING HOLE | INCHES MINIMUM 0.464 AND INCHES MAXIMUM 0.474 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.164 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CQJL | CURRENT CARRYING RATING IN AMPS | 30.0 |
| CSNM | FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| ELEC | VOLTAGE IN VOLTS | 250.0 |
| MATT | MATERIAL | BODY PLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND GLASS AND PLASTIC POLYCAPROLACTAM AND GLASS AND PLASTIC POLYHEXAMETHYLENE SEBACAMIDE AND GLASS |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL---14, TYE SDG |
| SFTT | SURFACE TREATMENT | CONTACT SILVER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CONTACT FED SPEC SINGLE TREATMENT RESPONSE QQ-S-365 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-F-19207 TO 18 |
| TTQY | TERMINAL TYPE AND QUANTITY | THREADED STUD 4 |
Cross-references
20 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 298109 | 23905 |
| HGN-CI-1K0859 | 71400 |
| 6439 1-2 | 71400 |
| FHL29G2 | 71400 |
| HGR | 71400 |
| M19207/18-2 | 81349 |
| FHL29G-002 | 81349 |
| MIL-PRF-19207/18 | 81349 |
| FHL29G2 | 81349 |
| FIC3400-2 | 84613 |
| 5920PL0713257 | 9009H |
| PL9001A1000-3 ITEM NO 4 | 8Z945 |
| EN DE124107 ITEM 1-95 | 96169 |
| 02-92-1110 | 96169 |
| 1080H39H05 | 04804 |
| 1080H37H65 | 04804 |
| 1080H30H25 | 04804 |
| 1080H31H41 | 04804 |
| 343MS074P001 | 04164 |
| 1068065 | 10001 |
Supersedes
This item replaces cancelled NIINs 002048121 · 001880554 · 006362178 · 008780792 · 012018087. An older drawing citing one of those numbers resolves here.