NSN 5920-00-269-3743 · NIIN 002693743 · FSC 5920
NO DASHES 5920002693743
In Stock
FUSEHOLDER,EXTRACTOR POST
Fuses, Arrestors, Absorbers, and Protectors
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGVF | BUSHING HOLE DIAMETER | INCHES MINIMUM 0.625 AND INCHES MAXIMUM 0.635 |
| CQJL | CURRENT CARRYING RATING IN AMPS | 20.0 |
| CSNM | FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| ELEC | VOLTAGE IN VOLTS | 250.0 |
| MATT | MATERIAL | BODY PLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND GLASS AND PLASTIC POLYCAPROLACTAM AND GLASS AND PLASTIC POLYHEXAMETHYLENE SEBACAMIDE AND GLASS AND PLASTIC DIALLYL PHTHALATE AND GLASS |
| MATT | MATERIAL | CONTACT COPPER |
| MATT | MATERIAL | TERMINAL COPPER ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL---14, TYE SDG AND MIL SPEC SINGLE MATERIAL RESPONSE -IL---19833, TYE GDI-30F |
| AGVH | FLATTED SIDE BUSHING HOLE LENGTH | INCHES MINIMUM 0.570 AND INCHES MAXIMUM 0.575 |
| AGUP | INDICATING LAMP VOLTAGE RANGE IN VOLTS | 61.0 TO 80.0 |
| AGUT | LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | INCHES MINIMUM 1.170 AND INCHES MAXIMUM 1.210 |
| AGUU | BUSHING THREAD LENGTH | INCHES MINIMUM 0.420 AND INCHES MAXIMUM 0.460 |
| AGUV | CAP DIAMETER | INCHES MINIMUM 0.510 AND INCHES MAXIMUM 0.550 |
| AAQL | BODY STYLE | |
| SFTT | SURFACE TREATMENT | CONTACT NICKEL |
| SFTT | SURFACE TREATMENT | TERMINAL SOLDER AND TIN |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-F-19207 TO 9 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 2 |
| ADZC | ENVIRONMENTAL PROTECTION | DRIPPROOF |
| ABKH | BUSHING DIAMETER | INCHES NOMINAL 0.625 |
| ABTJ | MOUNTING HOLE QUANTITY | 1 |
| AEVB | MOUNTING HOLE STYLE | |
| AFXH | INTERRUPTION INDICATOR METHOD | INCANDESCENT LAMP |
| AGUE | FUSE ACCOMMODATION QUANTITY | 1 |
| AGUJ | ACCOMMODATED FUSE LENGTH | INCHES NOMINAL 1.250 |
| AGUK | ACCOMMODATED FERRULE DIAMETER | INCHES NOMINAL 0.250 |
| AGUN | RESISTOR RATING | KILOHMS 1.8 |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 0.790 AND INCHES MAXIMUM 0.830 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 3.310 |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 349061 | 75915 |
| 430077-5 | 80249 |
| FHL18G1-05 | 81349 |
| FHL18G-05 | 81349 |
| FHL18G1-5 | 81349 |
| MIL-PRF-19207/9 | 81349 |
| CR55A/U-90 | 81349 |
| FLH18G1-5 | 81349 |
| 538110-5 | 96214 |
| FHL18G-2 | 02387 |
| 4134600-25 | 05869 |
| 4134600-025 | 05869 |
Supersedes
This item replaces cancelled NIINs 007812639 · 009202338. An older drawing citing one of those numbers resolves here.