NSN 5920-00-421-0952 · NIIN 004210952 · FSC 5920
NO DASHES 5920004210952
In Stock
FUSEHOLDER,EXTRACTOR POST
Fuses, Arrestors, Absorbers, and Protectors
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADZC | ENVIRONMENTAL PROTECTION | DRIPPROOF |
| AGUK | ACCOMMODATED FERRULE DIAMETER | INCHES NOMINAL 0.250 |
| AGUN | RESISTOR RATING | KILOHMS 2.0 |
| AFXH | INTERRUPTION INDICATOR METHOD | INCANDESCENT LAMP |
| AGUP | INDICATING LAMP VOLTAGE RANGE IN VOLTS | 81.0 TO 90.0 |
| AGUJ | ACCOMMODATED FUSE LENGTH | INCHES NOMINAL 1.250 |
| AAQL | BODY STYLE | |
| MATT | MATERIAL | BODY PLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND GLASS AND PLASTIC POLYCAPROLACTAM AND GLASS AND PLASTIC POLYHEXAMETHYLENE SEBACAMIDE AND GLASS |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL---14, TYE SDG |
| PMLC | PRECIOUS MATERIAL AND LOCATION | SILVER CONTACT SURFACES |
| PRMT | PRECIOUS MATERIAL | SILVER |
| SFTT | SURFACE TREATMENT | CONTACT SILVER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CONTACT FED SPEC SINGLE TREATMENT RESPONSE QQ-S-365 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-F-19207 |
| TTQY | TERMINAL TYPE AND QUANTITY | THREADED STUD 4 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-F-19207 TO 18 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.164 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AGUE | FUSE ACCOMMODATION QUANTITY | 2 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 3.750 AND INCHES MAXIMUM 4.000 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 1.812 AND INCHES MAXIMUM 1.817 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 1.180 AND INCHES MAXIMUM 1.185 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.151 AND INCHES MAXIMUM 0.161 |
| AGUT | LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | INCHES MINIMUM 0.798 AND INCHES MAXIMUM 0.828 |
| AGVB | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 0.933 AND INCHES MAXIMUM 0.943 |
| AGVF | BUSHING HOLE DIAMETER | INCHES MINIMUM 0.869 AND INCHES MAXIMUM 0.879 |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| AEVB | MOUNTING HOLE STYLE | |
| AGVK | CENTER TO CENTER DISTANCE BETWEEN BUSHING HOLES | INCHES MINIMUM 0.795 AND INCHES MAXIMUM 0.805 |
| CQJL | CURRENT CARRYING RATING IN AMPS | 30.0 |
| CSNM | FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| ELEC | VOLTAGE IN VOLTS | 90.0 |
| AGVM | CENTER TO CENTER DISTANCE BETWEEN KEYWAY AND BUSHING HOLE | INCHES MINIMUM 0.464 AND INCHES MAXIMUM 0.474 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-F-19207/18 | 81349 |
| MILF19207FHL29G | 81349 |
| FHL29G6 | 81349 |
| MIL-PRF-19207/18 | 81349 |
| FHL29G-006 | 81349 |
Supersedes
This item replaces cancelled NIIN 001704224. An older drawing citing one of those numbers resolves here.