NSN 5920-00-828-7904 · NIIN 008287904 · FSC 5920
NO DASHES 5920008287904
In Stock
FUSEHOLDER,BLOCK
Fuses, Arrestors, Absorbers, and Protectors
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGUJ | ACCOMMODATED FUSE LENGTH | INCHES NOMINAL 2.078 |
| AGVA | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | INCHES MINIMUM 0.484 AND INCHES MAXIMUM 0.516 |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 3.094 AND INCHES MAXIMUM 3.156 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL---14, TYE --E AND MIL SPEC SINGLE MATERIAL RESPONSE -IL---14, TYE -SI-30 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CONTACT FED SPEC SINGLE MATERIAL RESPONSE QQ-C-530 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-C-533 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | SILVER CONTACT SURFACES |
| PRMT | PRECIOUS MATERIAL | SILVER |
| SFTT | SURFACE TREATMENT | CONTACT SILVER |
| SFTT | SURFACE TREATMENT | TERMINAL CADMIUM AND CADMIUM AND CHROMATE AND CADMIUM AND PHOSPHATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CONTACT FED SPEC SINGLE TREATMENT RESPONSE QQ-S-365 |
| AGVB | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 0.968 AND INCHES MAXIMUM 1.032 |
| CQJL | CURRENT CARRYING RATING IN AMPS | 30.0 |
| CSDX | INTERNAL CIRCUIT CONFIGURATION AND POLE QUANTITY | POLE, MAINLINE, FUSED 3 |
| CSNM | FUSE TERMINAL TYPE ACCOMMODATED | KNIFE BLADE |
| ABKW | OVERALL HEIGHT | INCHES MAXIMUM 0.938 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 1.688 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.204 AND INCHES MAXIMUM 0.210 |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| ACYB | BASE THICKNESS | INCHES MINIMUM 0.268 AND INCHES MAXIMUM 0.312 |
| AEVB | MOUNTING HOLE STYLE | |
| AGUE | FUSE ACCOMMODATION QUANTITY | 3 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TERMINAL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 6 |
| MATT | MATERIAL | BODY PLASTIC MELAMINE AND SILICA AND PLASTIC SILICONE AND GLASS FIBER |
| MATT | MATERIAL | CONTACT COPPER ALLOY 172 OR COPPER ALLOY 173 OR COPPER ALLOY 170 OR COPPER ALLOY 172 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIINs 002404060 · 002961022 · 002961023 · 002847073 · 006159438 · 006599984 · 008230313. An older drawing citing one of those numbers resolves here.