NSN 5920-00-841-7283 · NIIN 008417283 · FSC 5920
NO DASHES 5920008417283
In Stock
FUSEHOLDER,EXTRACTOR POST
Fuses, Arrestors, Absorbers, and Protectors
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGVB | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH | INCHES NOMINAL 0.502 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.152 AND INCHES NOMINAL 0.781 |
| ABTJ | MOUNTING HOLE QUANTITY | 3 AND 4 |
| AAQL | BODY STYLE | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-F-19207 |
| TTQY | TERMINAL TYPE AND QUANTITY | THREADED STUD 3 AND SCREW 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-F-19207 TO 31 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 2.880 |
| MATT | MATERIAL | BODY PLASTIC PHENOLIC |
| MATT | MATERIAL | CONTACT COPPER |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CQJL | CURRENT CARRYING RATING IN AMPS | 30.0 |
| CSNM | FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| ELEC | VOLTAGE IN VOLTS | 500.0 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 1.190 |
| ADZC | ENVIRONMENTAL PROTECTION | LOCATION NOT OTHERWISE SPECIFIED WATERTIGHT |
| AEVB | MOUNTING HOLE STYLE | |
| AGUE | FUSE ACCOMMODATION QUANTITY | 3 |
| AGUJ | ACCOMMODATED FUSE LENGTH | INCHES NOMINAL 1.500 |
| AGUK | ACCOMMODATED FERRULE DIAMETER | INCHES NOMINAL 0.406 |
| AGUT | LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | INCHES NOMINAL 0.560 |
| AGUV | CAP DIAMETER | INCHES NOMINAL 0.880 |
| ADZC | ENVIRONMENTAL PROTECTION | HIGHEST AC VOLTAGE RATING AT SEA LEVEL SEALED |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.720 |
| AGVF | BUSHING HOLE DIAMETER | INCHES MINIMUM 0.771 AND INCHES MAXIMUM 0.786 |
| AGVK | CENTER TO CENTER DISTANCE BETWEEN BUSHING HOLES | INCHES MINIMUM 0.994 AND INCHES MAXIMUM 1.009 |
| AGVL | SECOND CENTER TO CENTER DISTANCE BETWEEN BUSHING HOLES | INCHES MINIMUM 0.994 AND INCHES MAXIMUM 1.009 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.190 |
| MATT | MATERIAL | TERMINAL COPPER ALLOY |
| AGVA | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | INCHES NOMINAL 1.002 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-PRF-19207/31 | 81349 |
| FHN47WB | 81349 |
| MIL-F-19207/31 | 81349 |
| 503 | 84613 |
Supersedes
This item replaces cancelled NIINs 016025152 · 000594561. An older drawing citing one of those numbers resolves here.