NSN 5920-00-900-0209 · NIIN 009000209 · FSC 5920
NO DASHES 5920009000209
In Stock
FUSEHOLDER,EXTRACTOR POST
Fuses, Arrestors, Absorbers, and Protectors
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | TERMINAL COPPER ALLOY |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-F-19207 |
| TTQY | TERMINAL TYPE AND QUANTITY | THREADED STUD 3 AND SCREW 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-F-19207 TO 30 |
| AGVF | BUSHING HOLE DIAMETER | INCHES MINIMUM 0.583 AND INCHES MAXIMUM 0.598 |
| AGVK | CENTER TO CENTER DISTANCE BETWEEN BUSHING HOLES | INCHES MINIMUM 0.745 AND INCHES MAXIMUM 0.757 |
| AGVL | SECOND CENTER TO CENTER DISTANCE BETWEEN BUSHING HOLES | INCHES MINIMUM 0.745 AND INCHES MAXIMUM 0.757 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.138 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CQJL | CURRENT CARRYING RATING IN AMPS | 30.0 |
| SFTT | SURFACE TREATMENT | CONTACT SILVER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CONTACT FED SPEC SINGLE TREATMENT RESPONSE QQ-S-365 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.147 AND INCHES MAXIMUM 0.157 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL---14, TYE SDG |
| PMLC | PRECIOUS MATERIAL AND LOCATION | SILVER CONTACT SURFACES |
| PRMT | PRECIOUS MATERIAL | SILVER |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.360 AND INCHES MAXIMUM 2.400 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 2.170 AND INCHES MAXIMUM 2.210 |
| CSNM | FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| ELEC | VOLTAGE IN VOLTS | 250.0 |
| AGUE | FUSE ACCOMMODATION QUANTITY | 3 |
| AGUJ | ACCOMMODATED FUSE LENGTH | INCHES NOMINAL 1.250 |
| AGUK | ACCOMMODATED FERRULE DIAMETER | INCHES NOMINAL 0.250 |
| AGUT | LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | INCHES MINIMUM 0.540 AND INCHES MAXIMUM 0.580 |
| AGUV | CAP DIAMETER | INCHES MINIMUM 0.600 AND INCHES MAXIMUM 0.640 |
| AGVA | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | INCHES MINIMUM 0.745 AND INCHES MAXIMUM 0.755 |
| AGVB | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.505 |
| ADZC | ENVIRONMENTAL PROTECTION | HIGHEST AC VOLTAGE RATING AT SEA LEVEL SEALED |
| MATT | MATERIAL | BODY PLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND GLASS AND PLASTIC POLYCAPROLACTAM AND GLASS AND PLASTIC POLYHEXAMETHYLENE SEBACAMIDE AND GLASS |
| MATT | MATERIAL | CONTACT COPPER |
| ADZC | ENVIRONMENTAL PROTECTION | LOCATION NOT OTHERWISE SPECIFIED WATERTIGHT |
| AEVB | MOUNTING HOLE STYLE | |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 1.040 AND INCHES MAXIMUM 1.080 |
| ABTJ | MOUNTING HOLE QUANTITY | 4 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| FHN46WB | 71400 |
| MIL-PRF-19207/30 | 81349 |
| MIL-F-19207/30 | 81349 |
| FHN46WB | 81349 |
| 303 | 84613 |