NSN 5920-00-948-5765 · NIIN 009485765 · FSC 5920
NO DASHES 5920009485765
In Stock
FUSEHOLDER,EXTRACTOR POST
Fuses, Arrestors, Absorbers, and Protectors
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| PRMT | PRECIOUS MATERIAL | SILVER |
| SFTT | SURFACE TREATMENT | CONTACT SILVER |
| AGVD | CENTER TO CENTER DISTANCE BETWEEN INSIDE MOUNTING HOLES ALONG LENGTH | INCHES MINIMUM 0.964 AND INCHES MAXIMUM 0.974 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-F-19207 TO 6 |
| CSNM | FUSE TERMINAL TYPE ACCOMMODATED | KNIFE BLADE |
| ELEC | VOLTAGE IN VOLTS | 500.0 |
| MATT | MATERIAL | BODY PLASTIC AND GLASS |
| TTQY | TERMINAL TYPE AND QUANTITY | THREADED STUD 2 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-F-19207 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.312 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | SILVER CONTACT SURFACES |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 8.990 AND INCHES MAXIMUM 9.010 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.279 AND INCHES MAXIMUM 0.283 |
| ABTJ | MOUNTING HOLE QUANTITY | 3 |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 2.980 AND INCHES MAXIMUM 3.020 |
| ADEE | PANEL THICKNESS | INCHES MAXIMUM 0.250 |
| ADZC | ENVIRONMENTAL PROTECTION | DRIPPROOF |
| AEVB | MOUNTING HOLE STYLE | |
| AFXH | INTERRUPTION INDICATOR METHOD | NEON LAMP |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CONTACT FED SPEC SINGLE TREATMENT RESPONSE QQ-S-365 |
| AGUE | FUSE ACCOMMODATION QUANTITY | 1 |
| AGUJ | ACCOMMODATED FUSE LENGTH | INCHES MINIMUM 1.000 |
| AGUL | ACCOMMODATED FUSE WIDTH | INCHES MINIMUM 0.715 AND INCHES MAXIMUM 0.785 |
| AGUM | ACCOMMODATED FUSE THICKNESS | INCHES MINIMUM 0.122 AND INCHES MAXIMUM 0.128 |
| AGUN | RESISTOR RATING | KILOHMS 160.0 |
| AGUP | INDICATING LAMP VOLTAGE RANGE IN VOLTS | 90.0 TO 500.0 |
| AGUT | LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | INCHES MINIMUM 1.870 AND INCHES MAXIMUM 1.880 |
| AGUV | CAP DIAMETER | INCHES MINIMUM 2.480 AND INCHES MAXIMUM 2.520 |
| AGVA | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | INCHES MINIMUM 1.928 AND INCHES MAXIMUM 1.948 |
| AGVB | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 2.350 AND INCHES MAXIMUM 2.400 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 18.0 |
| AGVF | BUSHING HOLE DIAMETER | INCHES MINIMUM 2.182 AND INCHES MAXIMUM 2.192 |
| AGVJ | CENTER TO CENTER DISTANCE BETWEEN BUSHING HOLE AND MOUNTING HOLE | INCHES MINIMUM 1.370 AND INCHES MAXIMUM 1.380 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL---14, TYE -AI-60 |
| AGQT | SHORTEST CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | INCHES MINIMUM 0.964 AND INCHES MAXIMUM 0.974 |
| CQJL | CURRENT CARRYING RATING IN AMPS | 1000.0 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| FHL15G | 81349 |
| MILF19207-6 | 81349 |
| FAL15G-001 | 81349 |
| MIL-PRF-19207/6 | 81349 |
| FHL15G-001 | 81349 |
Supersedes
This item replaces cancelled NIINs 013914982 · 002404069. An older drawing citing one of those numbers resolves here.