NSN 5920-00-962-9874 · NIIN 009629874 · FSC 5920
NO DASHES 5920009629874
In Stock
FUSEHOLDER,EXTRACTOR POST
Fuses, Arrestors, Absorbers, and Protectors
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGUP | INDICATING LAMP VOLTAGE RANGE IN VOLTS | 23.0 TO 33.0 |
| AGVB | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH | INCHES NOMINAL 0.875 |
| AGUN | RESISTOR RATING | OHMS 330.0 |
| AGVF | BUSHING HOLE DIAMETER | INCHES NOMINAL 0.875 |
| AGVM | CENTER TO CENTER DISTANCE BETWEEN KEYWAY AND BUSHING HOLE | INCHES NOMINAL 0.437 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.164 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CQJL | CURRENT CARRYING RATING IN AMPS | 30.0 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.875 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 1.200 AND INCHES MAXIMUM 1.205 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 1.070 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.105 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.156 |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| ADZC | ENVIRONMENTAL PROTECTION | DRIPPROOF |
| AGUT | LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | INCHES NOMINAL 0.813 |
| AGVA | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | INCHES NOMINAL 0.750 |
| AAQL | BODY STYLE | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-F-19207 |
| AEVB | MOUNTING HOLE STYLE | |
| AFXH | INTERRUPTION INDICATOR METHOD | INCANDESCENT LAMP |
| AGUE | FUSE ACCOMMODATION QUANTITY | 1 |
| AGUJ | ACCOMMODATED FUSE LENGTH | INCHES NOMINAL 1.250 |
| AGUK | ACCOMMODATED FERRULE DIAMETER | INCHES NOMINAL 0.250 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | SILVER CONTACTS |
| PRMT | PRECIOUS MATERIAL | SILVER |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-F-19207 TO 19 |
| SFTT | SURFACE TREATMENT | CONTACT SILVER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CONTACT FED SPEC SINGLE TREATMENT RESPONSE QQ-S-365 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL---14, TYE SDG |
| CSNM | FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| ELEC | VOLTAGE IN VOLTS | 28.0 |
| MATT | MATERIAL | BODY PLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND GLASS AND PLASTIC POLYCAPROLACTAM AND GLASS AND PLASTIC POLYHEXAMETHYLENE SEBACAMIDE AND GLASS |
| TTQY | TERMINAL TYPE AND QUANTITY | THREADED STUD 2 |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-PRF-19207/19 | 81349 |
| FHL30G2 | 81349 |
| MILF19207-19 | 81349 |
| MILF19207-19TYPEFHL3 | 81349 |
| FHL30G-002 | 81349 |
| 10FH1-28V | 84613 |
| FHL30G-2 | 84613 |
| 5920PL0965347 | 9009H |
| 352250014202 | H0203 |
| 1080H37H63 | 04804 |
| 1080H30H71 | 04804 |
| 1080H31H39 | 04804 |
| 1092810 | 10001 |
| L01892 | 16236 |
Supersedes
This item replaces cancelled NIINs 005193964 · 006172216 · 006816122 · 010215197. An older drawing citing one of those numbers resolves here.