NSN 5920-01-022-6507 · NIIN 010226507 · FSC 5920
NO DASHES 5920010226507
In Stock
FUSEHOLDER,EXTRACTOR POST
Fuses, Arrestors, Absorbers, and Protectors
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 3.310 |
| ABKH | BUSHING DIAMETER | INCHES NOMINAL 0.625 |
| ABTJ | MOUNTING HOLE QUANTITY | 1 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 0.820 |
| ADZC | ENVIRONMENTAL PROTECTION | DRIPPROOF |
| AEVB | MOUNTING HOLE STYLE | |
| AEXD | LENS COLOR | AMBER |
| AFXH | INTERRUPTION INDICATOR METHOD | INCANDESCENT LAMP |
| AGUE | FUSE ACCOMMODATION QUANTITY | 1 |
| AGUJ | ACCOMMODATED FUSE LENGTH | INCHES NOMINAL 1.250 |
| AGUK | ACCOMMODATED FERRULE DIAMETER | INCHES NOMINAL 0.250 |
| AGUN | RESISTOR RATING | KILOHMS 2.0 |
| AGUP | INDICATING LAMP VOLTAGE RANGE IN VOLTS | 81.0 TO 90.0 |
| AGUT | LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | INCHES NOMINAL 1.190 |
| AGUU | BUSHING THREAD LENGTH | INCHES NOMINAL 0.440 |
| AGUV | CAP DIAMETER | INCHES NOMINAL 0.820 |
| AGVF | BUSHING HOLE DIAMETER | INCHES MINIMUM 0.625 AND INCHES MAXIMUM 0.635 |
| AGVH | FLATTED SIDE BUSHING HOLE LENGTH | INCHES MINIMUM 0.570 AND INCHES MAXIMUM 0.575 |
| CQJL | CURRENT CARRYING RATING IN AMPS | 20.0 |
| CSNM | FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| ELEC | VOLTAGE IN VOLTS | 125.0 |
| MATT | MATERIAL | BODY PLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND GLASS AND PLASTIC POLYCAPROLACTAM AND GLASS AND PLASTIC POLYHEXAMETHYLENE SEBACAMIDE AND GLASS AND PLASTIC DIALLYL PHTHALATE AND GLASS |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL---14, TYE SDG OR MIL SPEC SINGLE MATERIAL RESPONSE -IL---19833, TYE GDI-30F |
| SFTT | SURFACE TREATMENT | TERMINAL SOLDER |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-F-19207 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 2 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-F-19207 TO 9E |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| FHL18G6 | 81349 |
| MILF19207-9 | 81349 |
| FHL18G1-6 | 81349 |
| MIL-PRF-19207/9 | 81349 |
| FHL18G1-06 | 81349 |
Supersedes
This item replaces cancelled NIIN 007260744. An older drawing citing one of those numbers resolves here.