NSN 5920-01-651-4992 · NIIN 016514992 · FSC 5920
NO DASHES 5920016514992
In Stock
FUSEHOLDER,EXTRACTOR POST
Fuses, Arrestors, Absorbers, and Protectors
Application: POWER SUPPLY
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEVB | MOUNTING HOLE STYLE | |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 1.790 AND INCHES MAXIMUM 1.830 |
| ADZC | ENVIRONMENTAL PROTECTION | WATERTIGHT |
| AGAV | END ITEM IDENTIFICATION | POWER SUPPLY |
| AGUE | FUSE ACCOMMODATION QUANTITY | 2 |
| AGUJ | ACCOMMODATED FUSE LENGTH | INCHES NOMINAL 1.250 |
| AGUK | ACCOMMODATED FERRULE DIAMETER | INCHES NOMINAL 0.250 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.147 AND INCHES MAXIMUM 0.157 |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| ADEE | PANEL THICKNESS | INCHES MAXIMUM 0.0187 |
| ELEC | VOLTAGE IN VOLTS | 33.0 |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.00 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 2.070 AND INCHES MAXIMUM 2.110 |
| AGVA | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | INCHES MINIMUM 1.775 AND INCHES MAXIMUM 1.785 |
| AEXD | LENS COLOR | CLEAR |
| AFXH | INTERRUPTION INDICATOR METHOD | INCANDESCENT LAMP |
| MATT | MATERIAL | BODY PLASTIC |
| SFTT | SURFACE TREATMENT | CONTACT SILVER |
| TTQY | TERMINAL TYPE AND QUANTITY | THREADED STUD 4 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CQJL | CURRENT CARRYING RATING IN AMPS | 30.0 |
| CSNM | FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| AGUN | RESISTOR RATING | OHMS 330.0 |
| AGUT | LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | INCHES NOMINAL 1.060 |
| AGUV | CAP DIAMETER | INCHES MINIMUM 0.620 AND INCHES MAXIMUM 0.630 |
| AGUW | MOUNTING HOLE HEIGHT | INCHES MINIMUM 1.578 AND INCHES MAXIMUM 1.610 |
| AGUX | MOUNTING HOLE WIDTH | INCHES MINIMUM 1.359 AND INCHES MAXIMUM 1.391 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FUSEHOLDER, EXTRACTOR, POST TYPE BLOWN FUSE FHL33W |
| AGVB | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 0.860 AND INCHES MAXIMUM 0.900 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.640 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-PRF-19207/22L | 81349 |
| MIL-PRF-19207/22 | 81349 |
| FHL33W-002 | 81349 |