NSN 5925-00-988-6837 · NIIN 009886837 · FSC 5925
NO DASHES 5925009886837
In Stock
CIRCUIT BREAKER
Circuit Breakers
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CTJS | UNPACKAGED UNIT WEIGHT | POUNDS NOMINAL 0.066 |
| CPRH | CIRCUIT PROTECTION TYPE | SINGLE LOCATION OVERCURRENT |
| FREQ | FREQUENCY IN HERTZ | 400.0 |
| CPRL | TRIP RELEASE CHARACTERISTIC | SINGLE LOCATION TIME DELAY |
| CPRG | MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS | SINGLE LOCATION AC 500.0 AND DC 2000.0 |
| CPRQ | RESET METHOD | MANUAL |
| CPRR | MAIN CONTACT TRIPPING MECHANISM TYPE | TRIP FREE |
| CPRT | MANUAL ACTUATOR TYPE AND QUANTITY | PUSH-PULL 1 |
| CPRW | ACTUATOR FUNCTION | TRIP-RESET |
| CPRX | ACTUATOR POSITION DESIGNATION | AT POLE ONE |
| CPRN | ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT | 145.0 |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | INCHES MINIMUM 0.562 AND INCHES MAXIMUM 0.624 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| CPRJ | TRIP RELEASE METHOD | SINGLE LOCATION THERMAL |
| THSD | THREAD SERIES DESIGNATOR | UNS |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB W/SCREW 2 |
| AKPX | POLE QUANTITY | 1 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED BUSHING WITH PANEL SEAL 1 |
| BBRG | STORAGE TYPE | GENERAL PURPOSE WAREHOUSE |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CPLM | MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE | SINGLE LOCATION AMPERES AC 7.5 AND AMPERES DC 7.5 |
| CPRF | OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS | SINGLE LOCATION AC 115.0 AND DC 28.0 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.580 |
| AAQL | BODY STYLE | |
| CPSM | INTERNAL TRIP RELEASE CONFIGURATION | SINGLE LOCATION SERIES TRIP |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.438 |
| CQWN | TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT | SINGLE LOCATION MINIMUM AT 200 PCT 2.000 AND MAXIMUM AT 200 PCT 20.000 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.420 |
| CQXF | INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED | SHOCK RESISTANT AND VIBRATION RESISTANT |
| CRCF | TRIP RELEASE AMBIENT TEMP RATING | SINGLE LOCATION CELSIUS NOMINAL 25.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-5809 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 96906--S26574-7-1 TO 2 |
| ABXD | BUSHING LENGTH | INCHES MINIMUM 0.381 AND INCHES MAXIMUM 0.780 |
Cross-references
19 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 525425 | 36378 |
| 5749067-117 | 53711 |
| AS58091 | 81343 |
| AS26574 | 81343 |
| MS26574-7-1/2 | 81343 |
| MS26574-7.5 | 81343 |
| MIL-C-5809 | 81349 |
| 7274-4-7-5 | 82647 |
| 7274-2-7 1/2 | 82647 |
| 7274-2-7-5 | 82647 |
| MS26574-1-2 | 96906 |
| MS26574-7.5 | 96906 |
| MS26574ASG71-2 | 96906 |
| MS26574-7-5 | 96906 |
| MS26574-7 | 96906 |
| 972.55.18.518 | S4080 |
| MS26574-7-1/2 | 0U583 |
| AS58091 | 0U583 |
| SAE-AS58091 | 0U583 |
Supersedes
This item replaces cancelled NIIN 009371828. An older drawing citing one of those numbers resolves here.