NSN 5930-00-308-7500 · NIIN 003087500 · FSC 5930
NO DASHES 5930003087500
In Stock
SWITCH,ROTARY
Switches
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSLC | SWITCH ACTUATOR POSITIONING INCREMENT | SINGLE ACTUATOR DEGREES 60.0 |
| CRSJ | SHAFT TYPE | SINGLE ACTUATOR ROUND, FLATTED |
| CTDN | SWITCH ACTUATOR STOP DEVICE TYPE | SINGLE ACTUATOR FIXED STOP |
| CTHF | CONTACT LOAD CURRENT RATING | AC AT SEA LEVEL MILLIAMPERES RESISTIVE LOAD 150.0 |
| CQJX | NOMINAL THREAD SIZE | SINGLE MOUNTING FACILITY INCHES 0.250 |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 115.0 |
| CSCF | TERMINAL TYPE | TAB, SOLDER LUG |
| CSMW | DETENT ROTATIONAL TORQUE RANGE | SINGLE ACTUATOR INCH-POUNDS 0.500 TO 1.500 |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 28.0 |
| CQRQ | SHAFT FLAT/SLOT ANGULAR LOCATION | SINGLE ACTUATOR DEGREES FROM NONTURN DEVICE 210.0 |
| CSHW | CONTACT SWITCHING ACTION | SINGLE SECTION REAR BREAKS BEFORE MAKES |
| AJZE | SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| AKPX | POLE QUANTITY | 1 |
| AKPY | THROW QUANTITY | 6 |
| AXGY | MOUNTING METHOD | SINGLE MOUNTING FACILITY THREADED BUSHING WITH PANEL SEAL |
| AFDC | NONTURN DEVICE TYPE | AT 3:00 OCLOCK FLATTED BUSHING |
| AFDC | NONTURN DEVICE TYPE | AT 9:00 OCLOCK FLATTED BUSHING |
| AFGA | OPERATING TEMP RANGE | CELSIUS -65.0 TO 85.0 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 0.500 |
| AFBH | INDIVIDUAL SECTION QUANTITY | 1 |
| CTHF | CONTACT LOAD CURRENT RATING | DC AT SEA LEVEL MILLIAMPERES RESISTIVE LOAD 200.0 AND MILLIAMPERES INDUCTIVE LOAD 30.0 AND MILLIAMPERES LAMP LOAD 100.0 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-3786 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE MOUNTING FACILITY UNF |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-3786 TO 20 |
| ABXF | SHAFT LENGTH | SINGLE ACTUATOR INCHES NOMINAL 0.375 |
| ABNC | FLAT HEIGHT | SINGLE ACTUATOR INCHES NOMINAL 0.093 |
| ABWV | SHAFT DIAMETER | SINGLE ACTUATOR INCHES NOMINAL 0.125 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.338 |
| CRJH | SWITCH ACTUATOR INDEXING POSITION QUANTITY | 6 |
| AASA | THREAD LENGTH | SINGLE MOUNTING FACILITY INCHES NOMINAL 0.250 |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
| ABNB | FIRST FLAT LENGTH | SINGLE ACTUATOR INCHES NOMINAL 0.250 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 11750-56 | 58880 |
| 50MY26011-1-6N | 81073 |
| M3786/20-056 | 81349 |
| MIL-S-3786/20 | 81349 |
| MIL-DTL-3786/20 | 81349 |
| SW618-056 | 04426 |