NSN 5930-00-420-8517 · NIIN 004208517 · FSC 5930
NO DASHES 5930004208517
In Stock
SWITCH,SENSITIVE
Switches
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AFXE | MAXIMUM VOLTAGE RATING IN VOLTS | DC 28.0 |
| AKNA | INCLOSURE TYPE | FULLY INCLOSED |
| AFUS | ACTUATOR HEIGHT | INCHES NOMINAL 0.065 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 0.510 |
| ABKQ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES MINIMUM 0.279 AND INCHES MAXIMUM 0.283 |
| ABKW | OVERALL HEIGHT | INCHES MAXIMUM 0.400 |
| CSJN | SWITCH ACTUATING FORCE | OUNCES MAXIMUM 8.0 |
| CXQQ | ACTUATOR MOVEMENT | PRETRAVEL INCHES MAXIMUM 0.035 AND OVERTRAVEL INCHES MINIMUM 0.004 AND DIFFERENTIAL INCHES MINIMUM 0.010 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.190 AND INCHES MAXIMUM 0.210 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.335 AND INCHES MAXIMUM 0.365 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.510 |
| AFUQ | ACTUATOR STYLE | |
| AFUR | ACTUATOR DIAMETER | INCHES MINIMUM 0.088 AND INCHES MAXIMUM 0.098 |
| AFUU | ACTUATOR FREE POSITION HEIGHT | INCHES MINIMUM 0.085 AND INCHES MAXIMUM 0.095 |
| AAQL | BODY STYLE | |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| CRLD | NONPILE-UP CONTACT ARRANGEMENT | SINGLE SWITCH UNIT POLE, DOUBLE THROW, BOTH POSITIONS MAINTAINED 1 |
| CRRM | SWITCH RELEASE FORCE | OUNCES MINIMUM 8.0 |
| CXQR | CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | AMPERES RESISTIVE DC 8.000 AND AMPERES INDUCTIVE DC 5.000 AND AMPERES MOTOR DC 5.000 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILS8805-76A |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.132 AND INCHES MAXIMUM 0.162 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 18-404-21 | 30323 |
| MILS8805-76 | 81349 |
| MIL-PRF-8805/76 | 81349 |
| MS27257-1 | 81349 |
| MS27257-1 | 96906 |
| 18-488051 | 04426 |
Supersedes
This item replaces cancelled NIINs 001324399 · 009330083. An older drawing citing one of those numbers resolves here.