NSN 5930-00-432-7013 · NIIN 004327013 · FSC 5930
NO DASHES 5930004327013
In Stock
SWITCH,ROTARY
Switches
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJZE | SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| CRJH | SWITCH ACTUATOR INDEXING POSITION QUANTITY | 8 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -65.0 TO 125.0 |
| CQRQ | SHAFT FLAT/SLOT ANGULAR LOCATION | SINGLE ACTUATOR DEGREES FROM NONTURN DEVICE 195.0 |
| CRSJ | SHAFT TYPE | SINGLE ACTUATOR ROUND, FLATTED |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 28.0 |
| CQJX | NOMINAL THREAD SIZE | SINGLE MOUNTING FACILITY INCHES 0.375 |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 115.0 |
| AKPX | POLE QUANTITY | 1 |
| AKPY | THROW QUANTITY | 8 |
| ABNB | FIRST FLAT LENGTH | SINGLE ACTUATOR INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.270 |
| ABNC | FLAT HEIGHT | SINGLE ACTUATOR INCHES MINIMUM 0.215 AND INCHES MAXIMUM 0.221 |
| ABWV | SHAFT DIAMETER | SINGLE ACTUATOR INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.251 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-3786 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE MOUNTING FACILITY UNEF |
| CSHW | CONTACT SWITCHING ACTION | EACH SECTION REAR BREAKS BEFORE MAKES |
| CSLC | SWITCH ACTUATOR POSITIONING INCREMENT | SINGLE ACTUATOR DEGREES 30.0 |
| CSMW | DETENT ROTATIONAL TORQUE RANGE | SINGLE ACTUATOR INCH-POUNDS 0.500 TO 2.500 |
| CTDN | SWITCH ACTUATOR STOP DEVICE TYPE | SINGLE ACTUATOR FIXED STOP |
| CTHF | CONTACT LOAD CURRENT RATING | AC AT SEA LEVEL AMPERES RESISTIVE LOAD 2.0 AND AMPERES INDUCTIVE LOAD 1.0 |
| CTHF | CONTACT LOAD CURRENT RATING | DC AT SEA LEVEL AMPERES INDUCTIVE LOAD 1.0 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.112 AND INCHES MAXIMUM 2.378 |
| AASA | THREAD LENGTH | SINGLE MOUNTING FACILITY INCHES MINIMUM 0.417 AND INCHES MAXIMUM 0.457 |
| AXGY | MOUNTING METHOD | SINGLE MOUNTING FACILITY THREADED BUSHING WITH PANEL SEAL |
| ABXF | SHAFT LENGTH | SINGLE ACTUATOR INCHES MINIMUM 0.834 AND INCHES MAXIMUM 0.914 |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 1.100 AND INCHES MAXIMUM 1.306 |
| AFBH | INDIVIDUAL SECTION QUANTITY | 2 |
| AFDC | NONTURN DEVICE TYPE | AT 3:00 OCLOCK SLOTTED BUSHING |
| CQTH | ROTOR THROUGH CONNECTION QUANTITY | 1 |
| AAJD | THREAD CLASS | 2A |
| CSCF | TERMINAL TYPE | TAB, SOLDER LUG |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 44HS30-02-1-8N | 81073 |
| M3786/4-5029 | 81349 |
| MILS3786-4 | 81349 |
| MIL-DTL-3786/4 | 81349 |
| 4M30F1-2N8 | 91812 |
| 128C651GJJXXX | 97942 |
Supersedes
This item replaces cancelled NIIN 001894339. An older drawing citing one of those numbers resolves here.