NSN 5930-00-433-6262 · NIIN 004336262 · FSC 5930
NO DASHES 5930004336262
In Stock
SWITCH,ROTARY
Switches
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CTHF | CONTACT LOAD CURRENT RATING | AC AT SEA LEVEL AMPERES RESISTIVE LOAD 2.0 AND AMPERES INDUCTIVE LOAD 1.0 |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 115.0 |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 28.0 |
| CTHF | CONTACT LOAD CURRENT RATING | DC AT SEA LEVEL AMPERES INDUCTIVE LOAD 1.0 |
| CSLC | SWITCH ACTUATOR POSITIONING INCREMENT | SINGLE ACTUATOR DEGREES 30.0 |
| CSMW | DETENT ROTATIONAL TORQUE RANGE | SINGLE ACTUATOR INCH-POUNDS 0.500 TO 2.500 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -65.0 TO 85.0 |
| AJZE | SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| CQRQ | SHAFT FLAT/SLOT ANGULAR LOCATION | SINGLE ACTUATOR DEGREES FROM NONTURN DEVICE 195.0 |
| AEFP | NONTURN DEVICE RADIUS | AT 3:00 OCLOCK INCHES MINIMUM 0.360 AND INCHES MAXIMUM 0.390 |
| AFBH | INDIVIDUAL SECTION QUANTITY | 1 |
| AFDC | NONTURN DEVICE TYPE | AT 3:00 OCLOCK TAB |
| AKPY | THROW QUANTITY | 10 |
| AXGY | MOUNTING METHOD | SINGLE MOUNTING FACILITY THREADED BUSHING |
| ABWV | SHAFT DIAMETER | SINGLE ACTUATOR INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.251 |
| ABXF | SHAFT LENGTH | SINGLE ACTUATOR INCHES MINIMUM 0.834 AND INCHES MAXIMUM 0.914 |
| AAJD | THREAD CLASS | 2A |
| CSHW | CONTACT SWITCHING ACTION | SINGLE SECTION REAR BREAKS BEFORE MAKES |
| ABNB | FIRST FLAT LENGTH | SINGLE ACTUATOR INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.270 |
| ABNC | FLAT HEIGHT | SINGLE ACTUATOR INCHES MINIMUM 0.215 AND INCHES MAXIMUM 0.221 |
| CTDN | SWITCH ACTUATOR STOP DEVICE TYPE | SINGLE ACTUATOR FIXED STOP |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 1.100 AND INCHES MAXIMUM 1.306 |
| AASA | THREAD LENGTH | SINGLE MOUNTING FACILITY INCHES MINIMUM 0.417 AND INCHES MAXIMUM 0.457 |
| CSCF | TERMINAL TYPE | TAB, SOLDER LUG |
| STYL | STYLE DESIGNATOR | |
| AKPX | POLE QUANTITY | 1 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-3786 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE MOUNTING FACILITY UNEF |
| CQTH | ROTOR THROUGH CONNECTION QUANTITY | 1 |
| CRJH | SWITCH ACTUATOR INDEXING POSITION QUANTITY | 10 |
| CRSJ | SHAFT TYPE | SINGLE ACTUATOR ROUND, FLATTED |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.797 AND INCHES MAXIMUM 2.001 |
| CQJX | NOMINAL THREAD SIZE | SINGLE MOUNTING FACILITY INCHES 0.375 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 44A30-01-1-10N | 81073 |
| MIL-DTL-3786/4 | 81349 |
| SR04E30B3MPC | 81349 |
| MILS3786-4 | 81349 |
| M3786/4-0009 | 81349 |
| A301-1-10C10N | 91812 |
| A301+1+10C10N | 91812 |
| 418633-40 | 96214 |
| MS16109N1-10 | 96906 |
| 4186050-7 | 05869 |
| 259-9475-090 | 13499 |
Supersedes
This item replaces cancelled NIIN 004920211. An older drawing citing one of those numbers resolves here.