NSN 5930-00-488-7320 · NIIN 004887320 · FSC 5930
NO DASHES 5930004887320
In Stock
SWITCH,ROTARY
Switches
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSCF | TERMINAL TYPE | TAB, SOLDER LUG |
| CSHW | CONTACT SWITCHING ACTION | EACH SECTION REAR BREAKS BEFORE MAKES |
| AKPX | POLE QUANTITY | 1 |
| AKPY | THROW QUANTITY | 12 |
| CRJH | SWITCH ACTUATOR INDEXING POSITION QUANTITY | 12 |
| CRSJ | SHAFT TYPE | SINGLE ACTUATOR ROUND, FLATTED |
| AXGY | MOUNTING METHOD | SINGLE MOUNTING FACILITY THREADED BUSHING |
| CQJX | NOMINAL THREAD SIZE | SINGLE MOUNTING FACILITY INCHES 0.375 |
| CQTH | ROTOR THROUGH CONNECTION QUANTITY | 1 |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 28.0 |
| CQRQ | SHAFT FLAT/SLOT ANGULAR LOCATION | SINGLE ACTUATOR DEGREES FROM NONTURN DEVICE 195.0 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -65.0 TO 85.0 |
| AJZE | SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| ABXF | SHAFT LENGTH | SINGLE ACTUATOR INCHES MINIMUM 0.834 AND INCHES MAXIMUM 0.914 |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 1.100 AND INCHES MAXIMUM 1.306 |
| AEFP | NONTURN DEVICE RADIUS | AT 3:00 OCLOCK INCHES MINIMUM 0.360 AND INCHES MAXIMUM 0.390 |
| ABNC | FLAT HEIGHT | SINGLE ACTUATOR INCHES MINIMUM 0.215 AND INCHES MAXIMUM 0.221 |
| ABWV | SHAFT DIAMETER | SINGLE ACTUATOR INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.251 |
| CSLC | SWITCH ACTUATOR POSITIONING INCREMENT | SINGLE ACTUATOR DEGREES 30.0 |
| CSMW | DETENT ROTATIONAL TORQUE RANGE | SINGLE ACTUATOR INCH-POUNDS 0.500 TO 2.500 |
| CTHF | CONTACT LOAD CURRENT RATING | AC AT SEA LEVEL AMPERES RESISTIVE LOAD 2.0 AND AMPERES INDUCTIVE LOAD 1.0 |
| CTHF | CONTACT LOAD CURRENT RATING | DC AT SEA LEVEL AMPERES INDUCTIVE LOAD 1.0 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-3786 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE MOUNTING FACILITY UNEF |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.427 AND INCHES MAXIMUM 2.755 |
| ABNB | FIRST FLAT LENGTH | SINGLE ACTUATOR INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.270 |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 115.0 |
| AFBH | INDIVIDUAL SECTION QUANTITY | 3 |
| AFDC | NONTURN DEVICE TYPE | AT 3:00 OCLOCK TAB |
| AAJD | THREAD CLASS | 2A |
| AASA | THREAD LENGTH | SINGLE MOUNTING FACILITY INCHES MINIMUM 0.417 AND INCHES MAXIMUM 0.457 |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 910877 | 34228 |
| 44M30-03-1-12N | 81073 |
| M3786/4-0055 | 81349 |
| MIL-DTL-3786/4 | 81349 |
| MILS3786-4 | 81349 |
| 1905M3-12NCD | 91812 |
| 361469-3 | 00752 |
| 2540469-2 | 10001 |
| 44A30-03-1-12-N | 14001 |
Supersedes
This item replaces cancelled NIINs 000184703 · 004443355 · 004729518 · 009960417. An older drawing citing one of those numbers resolves here.