NSN 5930-00-501-4957 · NIIN 005014957 · FSC 5930
NO DASHES 5930005014957
In Stock
SWITCH,PUSH
Switches
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AFUQ | ACTUATOR STYLE | |
| AFUR | ACTUATOR DIAMETER | INCHES MINIMUM 0.370 AND INCHES MAXIMUM 0.377 |
| AFUS | ACTUATOR HEIGHT | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.888 AND INCHES MAXIMUM 0.920 |
| ABXD | BUSHING LENGTH | INCHES MINIMUM 0.296 AND INCHES MAXIMUM 0.328 |
| AFXE | MAXIMUM VOLTAGE RATING IN VOLTS | AC 115.0 AND DC 28.0 |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.375 |
| CRLD | NONPILE-UP CONTACT ARRANGEMENT | SINGLE SWITCH UNIT POLE, SINGLE THROW, NORMALLY OPEN, MOMENTARY ACTION 1 |
| CXQR | CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | AMPERES RESISTIVE DC 10.000 AND AMPERES INDUCTIVE DC 3.000 AND AMPERES LAMP DC 3.000 AND AMPERES RESISTIVE AC 10.000 AND AMPERES INDUCTIVE AC 5.000 AND AMPERES LAMP AC 3.000 |
| HUES | COLOR | SINGLE ACTUATOR BLACK |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-8805 |
| THSD | THREAD SERIES DESIGNATOR | UNEF |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 0.875 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.875 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.552 AND INCHES MAXIMUM 0.572 |
| CBBL | FEATURES PROVIDED | ACTUATOR SEAL |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.625 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 2 |
| AKNA | INCLOSURE TYPE | FULLY INCLOSED |
| AXGY | MOUNTING METHOD | THREADED BUSHING |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| P1-60010 | 21649 |
| NX301FB1B | 28986 |
| MS25089-1F | 81349 |
| MILS8805-3 | 81349 |
| MIL-PRF-8805/3 | 81349 |
| 312A1178P1 | 89954 |
| MS25089-1F | 96906 |
| 71341231-001 | 04939 |
| 355-212-001 | 07421 |
Supersedes
This item replaces cancelled NIIN 012118010. An older drawing citing one of those numbers resolves here.