NSN 5930-00-525-4264 · NIIN 005254264 · FSC 5930
NO DASHES 5930005254264
In Stock
SWITCH,ROTARY
Switches
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABWV | SHAFT DIAMETER | SINGLE ACTUATOR INCHES NOMINAL 0.250 |
| ABXF | SHAFT LENGTH | SINGLE ACTUATOR INCHES NOMINAL 0.437 |
| CSLC | SWITCH ACTUATOR POSITIONING INCREMENT | SINGLE ACTUATOR DEGREES 60.0 |
| CSMW | DETENT ROTATIONAL TORQUE RANGE | SINGLE ACTUATOR INCH-POUNDS 0.500 TO 2.500 |
| CTHF | CONTACT LOAD CURRENT RATING | AC AT SEA LEVEL MILLIAMPERES RESISTIVE LOAD 75.0 |
| CTHF | CONTACT LOAD CURRENT RATING | DC AT SEA LEVEL MILLIAMPERES RESISTIVE LOAD 250.0 AND MILLIAMPERES INDUCTIVE LOAD 100.0 |
| STYL | STYLE DESIGNATOR | |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 1.000 AND INCHES MAXIMUM 1.306 |
| AFBH | INDIVIDUAL SECTION QUANTITY | 1 |
| AFDC | NONTURN DEVICE TYPE | AT 3:00 OCLOCK SLOTTED BUSHING |
| AFGA | OPERATING TEMP RANGE | CELSIUS -65.0 TO 125.0 |
| CSCF | TERMINAL TYPE | TAB, SOLDER LUG |
| CSHW | CONTACT SWITCHING ACTION | SINGLE SECTION REAR BREAKS BEFORE MAKES |
| AASA | THREAD LENGTH | SINGLE MOUNTING FACILITY INCHES NOMINAL 0.437 |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.899 |
| ABNB | FIRST FLAT LENGTH | SINGLE ACTUATOR INCHES NOMINAL 0.250 |
| ABNC | FLAT HEIGHT | SINGLE ACTUATOR INCHES NOMINAL 0.216 |
| CRJH | SWITCH ACTUATOR INDEXING POSITION QUANTITY | 6 |
| CRSJ | SHAFT TYPE | SINGLE ACTUATOR ROUND, FLATTED |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-3786 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE MOUNTING FACILITY UNEF |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-3786 TO 4 |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 28.0 |
| CQRQ | SHAFT FLAT/SLOT ANGULAR LOCATION | SINGLE ACTUATOR DEGREES FROM NONTURN DEVICE 195.0 |
| CQTH | ROTOR THROUGH CONNECTION QUANTITY | 1 |
| CQJX | NOMINAL THREAD SIZE | SINGLE MOUNTING FACILITY INCHES 0.375 |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 115.0 |
| AJZE | SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| AKPX | POLE QUANTITY | 1 |
| AKPY | THROW QUANTITY | 6 |
| AXGY | MOUNTING METHOD | SINGLE MOUNTING FACILITY THREADED BUSHING WITH PANEL SEAL |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 44HS60-01-1-6N | 81073 |
| MIL-S-3786/4 | 81349 |
| MIL-DTL-3786/4 | 81349 |
| M3786/4-6029 | 81349 |
| 50-1926M1-6NCP | 91812 |
| 4M60F1-1N6C | 91812 |
| 16A115 | 98437 |