NSN 5930-00-689-2837 · NIIN 006892837 · FSC 5930
NO DASHES 5930006892837
In Stock
SWITCH,ROTARY
Switches
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRJH | SWITCH ACTUATOR INDEXING POSITION QUANTITY | 12 |
| CSHW | CONTACT SWITCHING ACTION | EACH SECTION REAR BREAKS BEFORE MAKES |
| CSLC | SWITCH ACTUATOR POSITIONING INCREMENT | SINGLE ACTUATOR DEGREES 30.0 |
| CSMW | DETENT ROTATIONAL TORQUE RANGE | SINGLE ACTUATOR INCH-POUNDS 1.200 TO 4.500 |
| CTHF | CONTACT LOAD CURRENT RATING | AC AT SEA LEVEL AMPERES RESISTIVE LOAD 2.0 AND AMPERES INDUCTIVE LOAD 1.0 |
| CQJX | NOMINAL THREAD SIZE | SINGLE MOUNTING FACILITY INCHES 0.375 |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 115.0 |
| CRSJ | SHAFT TYPE | SINGLE ACTUATOR ROUND, FLATTED |
| CSCF | TERMINAL TYPE | TAB, SOLDER LUG |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 28.0 |
| CQRQ | SHAFT FLAT/SLOT ANGULAR LOCATION | SINGLE ACTUATOR DEGREES FROM NONTURN DEVICE 195.0 |
| CQTH | ROTOR THROUGH CONNECTION QUANTITY | 1 |
| AJZE | SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| AKPX | POLE QUANTITY | 1 |
| AKPY | THROW QUANTITY | 12 |
| AXGY | MOUNTING METHOD | SINGLE MOUNTING FACILITY THREADED BUSHING |
| AFBH | INDIVIDUAL SECTION QUANTITY | 4 |
| AFDC | NONTURN DEVICE TYPE | AT 3:00 OCLOCK TAB |
| AFGA | OPERATING TEMP RANGE | CELSIUS -65.0 TO 85.0 |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 1.100 AND INCHES MAXIMUM 1.306 |
| AEFP | NONTURN DEVICE RADIUS | AT 3:00 OCLOCK INCHES MINIMUM 0.360 AND INCHES MAXIMUM 0.390 |
| CTHF | CONTACT LOAD CURRENT RATING | DC AT SEA LEVEL AMPERES INDUCTIVE LOAD 1.0 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-3786 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE MOUNTING FACILITY UNEF |
| ABWV | SHAFT DIAMETER | SINGLE ACTUATOR INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.251 |
| ABXF | SHAFT LENGTH | SINGLE ACTUATOR INCHES MINIMUM 0.834 AND INCHES MAXIMUM 0.914 |
| ABNC | FLAT HEIGHT | SINGLE ACTUATOR INCHES MINIMUM 0.215 AND INCHES MAXIMUM 0.221 |
| ABNB | FIRST FLAT LENGTH | SINGLE ACTUATOR INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.270 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.742 AND INCHES MAXIMUM 3.132 |
| AAJD | THREAD CLASS | 2A |
| AASA | THREAD LENGTH | SINGLE MOUNTING FACILITY INCHES MINIMUM 0.417 AND INCHES MAXIMUM 0.457 |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2618142 | 30003 |
| 44M30-04-1-12N | 81073 |
| MILS3786-4 | 81349 |
| MIL-DTL-3786/4 | 81349 |
| M3786/4-0077 | 81349 |
| C1051-1A4NC | 81755 |
| 12A4318-53 | 81755 |
| 1905M-4-12-NC | 91812 |
| 538097-77 | 96214 |
| 335-145-001 | 07421 |
Supersedes
This item replaces cancelled NIINs 000659816 · 001406616 · 002419341 · 007108234 · 007925187. An older drawing citing one of those numbers resolves here.