NSN 5930-00-835-0340 · NIIN 008350340 · FSC 5930
NO DASHES 5930008350340
In Stock
SWITCH,SENSITIVE
Switches
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSJN | SWITCH ACTUATING FORCE | OUNCES MAXIMUM 10.0 |
| AFXE | MAXIMUM VOLTAGE RATING IN VOLTS | AC 115.0 AND DC 28.0 |
| ADAU | BODY HEIGHT | INCHES MAXIMUM 0.984 |
| CXQQ | ACTUATOR MOVEMENT | PRETRAVEL INCHES MAXIMUM 0.040 AND OVERTRAVEL INCHES MINIMUM 0.005 AND DIFFERENTIAL INCHES MAXIMUM 0.003 |
| CXQR | CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | AMPERES RESISTIVE DC 2.000 AND AMPERES INDUCTIVE DC 1.000 AND AMPERES LAMP DC 1.500 AND AMPERES RESISTIVE AC 15.000 AND AMPERES INDUCTIVE AC 15.000 AND AMPERES LAMP AC 1.500 |
| MATT | MATERIAL | CASE PLASTIC |
| AFUU | ACTUATOR FREE POSITION HEIGHT | INCHES MINIMUM 0.605 AND INCHES MAXIMUM 0.645 |
| AFUQ | ACTUATOR STYLE | |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-8805 TO 1 |
| AKNA | INCLOSURE TYPE | UNINCLOSED |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| AFUR | ACTUATOR DIAMETER | INCHES MAXIMUM 0.219 |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.937 |
| ABKQ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES MINIMUM 0.998 AND INCHES MAXIMUM 1.002 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.687 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.922 AND INCHES MAXIMUM 1.952 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.672 AND INCHES MAXIMUM 0.702 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| CRLD | NONPILE-UP CONTACT ARRANGEMENT | SINGLE SWITCH UNIT POLE, DOUBLE THROW, ONE POSITION MOMENTARY 1 |
| CRRM | SWITCH RELEASE FORCE | OUNCES MINIMUM 4.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-8805 |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.139 AND INCHES MAXIMUM 0.143 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| M8805/1-028 | 81349 |
| MIL-S-8805/1 | 81349 |
| MS25026-1 | 96906 |
Supersedes
This item replaces cancelled NIIN 006362895. An older drawing citing one of those numbers resolves here.