NSN 5930-01-011-7445 · NIIN 010117445 · FSC 5930
NO DASHES 5930010117445
In Stock
SWITCH,TOGGLE
Switches
Application: WEAPON SYSTEM-AIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); HELICOP
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | WATERTIGHT |
| ABXD | BUSHING LENGTH | INCHES NOMINAL 0.469 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.562 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.546 |
| AFUQ | ACTUATOR STYLE | |
| AFUR | ACTUATOR DIAMETER | INCHES MINIMUM 0.235 AND INCHES MAXIMUM 0.245 |
| AFUS | ACTUATOR HEIGHT | INCHES MINIMUM 0.655 AND INCHES MAXIMUM 0.719 |
| AFUX | ACTUATOR POSITION-ACTION RELATIONSHIP | UP POSITION MAINTAINED AND DOWN POSITION MAINTAINED AND CENTER POSITION MAINTAINED |
| AFXE | MAXIMUM VOLTAGE RATING IN VOLTS | AC 115.0 AND DC 28.0 |
| AGAV | END ITEM IDENTIFICATION | WEAPON SYSTEM-AIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); HELICOP |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 0.469 |
| AKNA | INCLOSURE TYPE | FULLY INCLOSED |
| AXGY | MOUNTING METHOD | THREADED BUSHING |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.469 |
| CRLD | NONPILE-UP CONTACT ARRANGEMENT | SINGLE SWITCH UNIT POLE, DOUBLE THROW, THREE POSITIONS MAINTAINED 2 |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CXQR | CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | AMPERES RESISTIVE DC 4.000 AND AMPERES INDUCTIVE DC 1.000 AND AMPERES RESISTIVE AC 3.000 AND AMPERES INDUCTIVE AC 1.000 |
| FEAT | SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILS8834 |
| THSD | THREAD SERIES DESIGNATOR | UNS |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 6 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-S-8834 | 81349 |
| MS21353-331 | 81349 |
| MIL-DTL-8834 | 81349 |
| 8869K9 | 81640 |
| 8869SPL | 81640 |
| CH8906K1425 | 81640 |
| 946-090-0002 | 95542 |
| MS21353-331 | 96906 |
| MS21353/01-331 | 96909 |
Supersedes
This item replaces cancelled NIIN 001309027. An older drawing citing one of those numbers resolves here.