NSN 5930-01-024-5538 · NIIN 010245538 · FSC 5930
NO DASHES 5930010245538
In Stock
SWITCH,ROTARY
Switches
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AASA | THREAD LENGTH | SINGLE MOUNTING FACILITY INCHES NOMINAL 0.410 |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.180 |
| ABNB | FIRST FLAT LENGTH | SINGLE ACTUATOR INCHES NOMINAL 0.250 |
| ABNC | FLAT HEIGHT | SINGLE ACTUATOR INCHES NOMINAL 0.210 |
| ABWV | SHAFT DIAMETER | SINGLE ACTUATOR INCHES NOMINAL 0.250 |
| ABXF | SHAFT LENGTH | SINGLE ACTUATOR INCHES NOMINAL 0.440 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 1.150 |
| AFBH | INDIVIDUAL SECTION QUANTITY | 3 |
| AFDC | NONTURN DEVICE TYPE | AT 3:00 OCLOCK SLOTTED BUSHING |
| AFGA | OPERATING TEMP RANGE | CELSIUS -28.0 TO 85.0 |
| AJZE | SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| AKPX | POLE QUANTITY | 2 |
| AKPY | THROW QUANTITY | 4 |
| AXGY | MOUNTING METHOD | SINGLE MOUNTING FACILITY THREADED BUSHING WITH PANEL SEAL |
| CQJX | NOMINAL THREAD SIZE | SINGLE MOUNTING FACILITY INCHES 0.375 |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 115.0 |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 28.0 |
| CQTH | ROTOR THROUGH CONNECTION QUANTITY | 2 |
| CRJH | SWITCH ACTUATOR INDEXING POSITION QUANTITY | 4 |
| CRSJ | SHAFT TYPE | SINGLE ACTUATOR ROUND, FLATTED |
| CSCF | TERMINAL TYPE | TAB, SOLDER LUG |
| CSHW | CONTACT SWITCHING ACTION | EACH SECTION REAR MAKES BEFORE BREAKS |
| CSLC | SWITCH ACTUATOR POSITIONING INCREMENT | SINGLE ACTUATOR DEGREES 45.0 |
| CTDN | SWITCH ACTUATOR STOP DEVICE TYPE | SINGLE ACTUATOR FIXED STOP |
| CTHF | CONTACT LOAD CURRENT RATING | AC AT SEA LEVEL AMPERES RESISTIVE LOAD 5.0 |
| CTHF | CONTACT LOAD CURRENT RATING | DC AT SEA LEVEL AMPERES RESISTIVE LOAD 5.0 AND AMPERES INDUCTIVE LOAD 1.5 |
| FEAT | SPECIAL FEATURES | PUSH SHAFT 0.070 IN. TO ENTER POSITION 4 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | SINGLE MOUNTING FACILITY UNEF |