NSN 5930-01-265-7976 · NIIN 012657976 · FSC 5930
NO DASHES 5930012657976
In Stock
SWITCH,ROTARY
Switches
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AASA | THREAD LENGTH | SINGLE MOUNTING FACILITY INCHES MINIMUM 0.417 AND INCHES MAXIMUM 0.457 |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF AND MOISTURE RESISTANT |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.937 |
| ABNB | FIRST FLAT LENGTH | SINGLE ACTUATOR INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.270 |
| ABNC | FLAT HEIGHT | SINGLE ACTUATOR INCHES NOMINAL 0.216 |
| ABWV | SHAFT DIAMETER | SINGLE ACTUATOR INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.251 |
| ABXF | SHAFT LENGTH | SINGLE ACTUATOR INCHES MINIMUM 0.417 AND INCHES MAXIMUM 0.457 |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 1.000 AND INCHES MAXIMUM 1.306 |
| AEFP | NONTURN DEVICE RADIUS | AT 3:00 OCLOCK INCHES MINIMUM 0.360 AND INCHES MAXIMUM 0.390 |
| AFBH | INDIVIDUAL SECTION QUANTITY | 4 |
| AFDC | NONTURN DEVICE TYPE | AT 3:00 OCLOCK TAB |
| AJZE | SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| AKPX | POLE QUANTITY | 1 |
| AKPY | THROW QUANTITY | 8 |
| AXGY | MOUNTING METHOD | SINGLE MOUNTING FACILITY THREADED BUSHING |
| CQJX | NOMINAL THREAD SIZE | SINGLE MOUNTING FACILITY INCHES 0.375 |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 28.0 |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 115.0 |
| CQTH | ROTOR THROUGH CONNECTION QUANTITY | 1 |
| CRJH | SWITCH ACTUATOR INDEXING POSITION QUANTITY | 8 |
| CRSJ | SHAFT TYPE | SINGLE ACTUATOR ROUND, FLATTED |
| CSCF | TERMINAL TYPE | TAB, SOLDER LUG |
| CSHW | CONTACT SWITCHING ACTION | EACH SECTION REAR MAKES BEFORE BREAKS |
| CSLC | SWITCH ACTUATOR POSITIONING INCREMENT | SINGLE ACTUATOR DEGREES 45.0 |
| CTHF | CONTACT LOAD CURRENT RATING | AC AT SEA LEVEL AMPERES RESISTIVE LOAD 2.0 |
| CTHF | CONTACT LOAD CURRENT RATING | DC AT SEA LEVEL AMPERES RESISTIVE LOAD 1.25 AND MILLIAMPERES INDUCTIVE LOAD 250.0 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-3786 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE MOUNTING FACILITY UNEF |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-3786 TO 4 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 44M45-04-1-8S | 81073 |
| 44M45-04-1-08S | 81073 |
| M3786/4-0975 | 81349 |
| MIL-DTL-3786/4 | 81349 |
| MIL-S-3786/4 | 81349 |
| 1906M-4-8S | 91812 |
Supersedes
This item replaces cancelled NIIN 002313662. An older drawing citing one of those numbers resolves here.