NSN 5935-00-057-5794 · NIIN 000575794 · FSC 5935
NO DASHES 5935000575794
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| PRMT | PRECIOUS MATERIAL | SILVER |
| PMLC | PRECIOUS MATERIAL AND LOCATION | SILVER CONTACT AND SHELL SURFACES |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | SILVER GRAINS, TROY 0.105 |
| CXCG | INCLUDED CONTACT QUANTITY | 1 |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING COAXIAL SOCKET |
| CTKL | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | SINGLE MATING END MIL SPEC SINGLE MATERIAL RESPONSE -IL--19468 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.625 |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| CSPT | SHELL MATERIAL | COPPER ALLOY |
| CSWM | SHELL SURFACE TREATMENT | SILVER |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ-S-365 |
| CTHH | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-B-626,CO- 22,1 TO 2 H |
| THSD | THREAD SERIES DESIGNATOR | UNEF |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.480 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING NONREMOVABLE |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SINGLE MATING END SINGLE CONTACT GROUPING FED SPEC SINGLE TREATMENT RESPONSE QQ-S-365 |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING SOLDER WELL |
| CSGF | CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | SINGLE MATING END SINGLE CONTACT GROUPING FED SPEC SINGLE MATERIAL RESPONSE QQ-C-530,COND H |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES NOMINAL 0.718 |
| AFQJ | CABLE ENTRANCE DIAMETER | INCHES MAXIMUM 0.224 |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES NOMINAL 0.703 |
| AFQR | THREADED DEVICE TYPE | COUPLING FACILITY |
| AFQW | MATING END QUANTITY | 1 |
| CQTZ | CONTACT MATERIAL | SINGLE MATING END SINGLE CONTACT GROUPING COPPER ALLOY |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END SINGLE CONTACT GROUPING SILVER |
| CQZG | INSERT MATERIAL | SINGLE MATING END PLASTIC TETRAFLUOROETHYLENE |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 1.000 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 1.000 |
| ADZC | ENVIRONMENTAL PROTECTION | SHOCK RESISTANT AND VIBRATION RESISTANT AND MOISTURE RESISTANT AND CORROSION RESISTANT AND WEATHERPROOF |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.125 |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES NOMINAL 0.718 |
| AFRW | CONNECTOR CABLE STRAIN RELIEF METHOD | CABLE CLAMP |
| AFRY | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 |
| AFRV | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
| AFRT | SHELL TYPE | SOLID |
| AAJD | THREAD CLASS | 2A |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 002511405. An older drawing citing one of those numbers resolves here.