NSN 5935-00-067-4695 · NIIN 000674695 · FSC 5935
NO DASHES 5935000674695
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AFQW | MATING END QUANTITY | 1 |
| AFRW | CONNECTOR CABLE STRAIN RELIEF METHOD | POTTING TYPE |
| AFRT | SHELL TYPE | SOLID |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 600.0 |
| AFRN | POLARIZATION METHOD | MATING END |
| PRMT | PRECIOUS MATERIAL | RHODIUM |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING COAXIAL PIN |
| PMLC | PRECIOUS MATERIAL AND LOCATION | RHODIUM CONTACT SURFACES |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | RHODIUM GRAINS, TROY 0.014 |
| CTKL | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | SINGLE MATING END MIL SPEC SINGLE MATERIAL RESPONSE -IL---14,TYE -DG |
| CXCG | INCLUDED CONTACT QUANTITY | 14 |
| AFRY | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 95.0 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 1.245 |
| ADZC | ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.174 AND INCHES MAXIMUM 0.179 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES NOMINAL 0.625 |
| AAQL | BODY STYLE | |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| CQZG | INSERT MATERIAL | SINGLE MATING END PLASTIC DIALLYL PHTHALATE |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING SOLDER WELL |
| CSPT | SHELL MATERIAL | ALUMINUM ALLOY |
| CSWM | SHELL SURFACE TREATMENT | CADMIUM |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING NONREMOVABLE |
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 7.5 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 1.468 |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| CQTZ | CONTACT MATERIAL | SINGLE MATING END SINGLE CONTACT GROUPING COPPER ALLOY |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END SINGLE CONTACT GROUPING RHODIUM |
| ABKQ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES NOMINAL 3.427 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.861 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 400125-1 | 20284 |
| 126-10014-1 | 77820 |
| 400125-1 | 77820 |
| 114-126-2006 | 95542 |
| 400125-1 | 02660 |
| 126-100014-2 | 02660 |
| 126-100014-1 | 02660 |
| 126-10014-1 | 02660 |
| 400125-1 | 12909 |
| DMS 82061B | 16236 |
Supersedes
This item replaces cancelled NIIN 001049994. An older drawing citing one of those numbers resolves here.